Kohler K-498 - Connect the Water Supplies; Install the Sidesprays

7. Connect the Water Supplies
Remove the covers or caps from the supply lines.
Apply thread sealant to the male adapters.
Insert a washer into each of the tower supply hoses.
IMPORTANT! Ensure that the hot and cold supply hoses are connected to the appropriate water supply
lines.
Thread the tower supply hoses onto the water supply adapters and securely wrench tighten.
8. Install the Sidesprays
Install the screen into the supply tube as shown.
Slide the sidespray onto the supply tube.
Tighten the setscrew to secure the sidespray to the supply tube.
Hot
Supply
Cold
Supply
Washers
Tower Supply
Hoses
Male
Adapter
Apply
thread
sealant.
Connect the Water Supplies
Setscrew
Sidespray
Screen
Supply
Tube
Install the Sidesprays
1010418-2-C 10 Kohler Co.