How to fix poor flush on Kohler K-4177?
To fix a poor flush with your Kohler Plumbing Product, first ensure the tank water level reaches the marked waterline by turning the white knob on the fill valve clockwise. Also, ensure proper drain line venting is installed according to code. Finally, check that the threaded rods behind the faceplate contact the flush buttons; adjust and tighten them if necessary to ensure proper contact.
What to do if fill valve does not shut off in Kohler K-4177?
If the fill valve on your Kohler Plumbing Product doesn't shut off, there are a few things you can check. First, try lowering the tank water level to the marked waterline by turning the white knob on the fill valve counterclockwise. If that doesn't work, the flush valve gasket or the flush valve itself may be damaged and need replacement. Another potential issue is that the flush valve might be sticking open, so check its movement and the actuating mechanism for any obstructions or stiffness. Replace any components that don't move freely.
Why is there no water flow in my Kohler K-4177?
If your Kohler Plumbing Product has no water flow, check the following: 1. Ensure the supply stop located in the tank is open (it's usually on the left side). 2. Inspect for any obstructions in the water line. To do this, close the external water supply stop, disconnect the braided hose at the fill valve, and check the flow. Clear any blockages found. 3. Refer to the service cover for instructions to check the fill valve debris screen for plugging.
What to do if Kohler K-4177 leaks from behind the bowl?
If your Kohler Plumbing Product is leaking from behind the bowl, the gaskets may not be positioned correctly. Remove the bowl and inspect all gaskets, repositioning them if necessary. Lubricate the gaskets to help them slide over the mating parts they seal. Reinstall the bowl, ensuring the gaskets stay in the correct position.
How to stop Kohler Plumbing Product carriage and bowl from flexing?
If the carriage and bowl of your Kohler Plumbing Product flex when used, it indicates insufficient support for the frame. You should add additional support members and mount the frame using 3/8" or larger lag bolts.
General| Brand | Kohler |
|---|---|
| Model | K-4177 |
| Category | Plumbing Product |
| Language | English |
To Next Page