6
Specications
KohlerEngines.com 32 690 03 Rev. E
GENERAL SPECIFICATIONS
3,6
KT715 KT725 KT730 KT735 KT740 KT745
Bore 83 mm (3.27 in.)
Stroke 67 mm (2.64 in.)
69 mm
(2.72 in.)
Displacement 725 cc (44 cu. in.)
747 cc
(46 cu. in.)
Oil Capacity (rell) 1.9 l (2.0 qt.)
Maximum Angle of Operation (@ full oil level)
4
25°
TORQUE SPECIFICATIONS
3,5
KT715 KT725 KT730 KT735 KT740 KT745
Auto Choke
eChoke
™
Stepper Motor to Bracket Fastener
Air Cleaner Base to Mounting Studs
3.1 N·m (27.4 in. lb.)
6.2-7.3 N·m (55-65 in. lb.)
Smart-Choke
™
Air Vane Deector to Intake Manifold
Air Cleaner Base to Mounting Studs
Bracket Assembly Screw
1 N·m (9 in. lb.)
6.2-7.3 N·m (55-65 in. lb.)
5 N·m (45 in. lb.)
Bafe and Sheet Metal into Aluminum
M5 Thread Forming Fasteners 8.5 N·m (75 in. lb.) into new hole
4.0 N·m (35 in. lb.) into used hole
M6 Thread Forming Fasteners 10.7 N·m (95 in. lb.) into new hole
7.3 N·m (65 in. lb.) into used hole
Blower Housing and Sheet Metal
M3 HI-LO Screw 2.3 N·m (20 in. lb.)
M4 HI-LO Screw 2.8 N·m (25 in. lb.)
M5 Fasteners 6.2 N·m (55 in. lb.) into new hole
4.0 N·m (35 in. lb.) into used hole
M6 Fasteners 10.7 N·m (95 in. lb.) into new hole
7.3 N·m (65 in. lb.) into used hole
ENGINE IDENTIFICATION NUMBERS
Kohler engine identication numbers (model, specication and serial) should be referenced for efcient repair,
ordering correct parts, and engine replacement.
Model .....................KT715
7000 Series Engine
Numerical Designation
Specication ...............KT715-0001
Serial .....................4323500328
Year Manufactured Code Factory Code
Code Year
43 2013
44 2014
45 2015
3
Values are in Metric units. Values in parentheses are English equivalents.
4
Exceeding maximum angle of operation may cause engine damage from insufcient lubrication.
5
Lubricate threads with engine oil prior to assembly.
6
Any and all horsepower (hp) references by Kohler are Certied Power Ratings and per SAE J1940 & J1995 hp
standards. Details on Certied Power Ratings can be found at KohlerEngines.com.