EasyManua.ls Logo

Kohler MEMOIRS Series User Manual

Kohler MEMOIRS Series
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1007275-2-A
2001 Kohler Co.
Español, Página 5
Français, Page 9
MEMOIRS
PEDESTAL LAVATORY
K-2258, K-2259
BEFORE YOU BEGIN
NOTES
Observe all local plumbing and
building codes.
Prior to installation, unpack the new
lavatory and inspect it for damage.
Return the lavatory to its protective
carton until you are ready to install it.
These instructions are for installing
the lavatory to wood frame
construction. For other installations,
supply suitable bracing and
fastening devices of sufficient size
and strength.
The walls and floor must be square,
plumb, and level.
ROUGHING-IN
(S) 10” (25.4cm) (Based on 12” (30.5cm)
risers which may require cutting).
(T) Pop-up drain typically 14-1/2”
(36.8cm); grid drain typically 13-5/8”
(34.6cm).
Fixture dimensions are nominal and
conform to tolerances in ASME Standard
A112.19.9M.
8-1/4” (21cm)
MOUNTING
HOLE
2-3/8”
(6cm)
8”
(20.3cm)
4” (10.2cm)
22” (55.9cm)
FINISHED WALL
27” (68.6cm)
(S)
(T)
22-1/8” (56.2cm)
35”
(88.9cm)
3/8” HOT
3/8” COLD
1/2” (1,3cm) D.
MOUNTING HOLE
IN PEDESTAL
1/2” (1.3cm) D.
ANCHOR HOLES IN
LAVATORY
1-1/4” OUTLET
3-1/4” (8.3cm)
8-7/8”
(22.5cm)
2-3/4”
(7cm)
K-2258-1
4” (10.2cm)
2-3/8”
(6cm)
K-2258-4
4” (10.2cm)
2-3/8”
(6cm)
K-2258-8
4” (10.2cm)
Question and Answer IconNeed help?

Do you have a question about the Kohler MEMOIRS Series and is the answer not in the manual?

Kohler MEMOIRS Series Specifications

General IconGeneral
CollectionMemoirs
MaterialVitreous China
Flush TypeClass Five
Water Consumption1.28 GPF
Rough-In12 inches
Bowl Height16.5 inches
Trapway Diameter2-1/8 inches
ADA CompliantYes
Installation TypeFloor Mounted
Bowl ShapeElongated

Summary

Installation Preparation

Installation Notes and Guidelines

Key considerations and advice before commencing the lavatory installation process.

Roughing-In Dimensions

Specifications for plumbing rough-in, including drain and water supply locations.

Installation Procedure

Tools and Materials Required

List of essential tools and materials needed for the lavatory installation.

Pre-Installation Steps

Steps including supply rough-in, backing installation, and gasket application.

Pedestal and Lavatory Placement

Instructions for positioning and leveling the pedestal and lavatory.

Securing the Pedestal

Process for drilling mounting holes and securing the pedestal to the floor.

Attaching the Lavatory

Steps for setting the lavatory onto the pedestal and securing it with cap nuts.

Final Plumbing Connections

Connecting the trap and water supplies to the faucet and drain.

Important Consumer Information

Care and Cleaning Instructions

Guidelines for maintaining the lavatory's surface and cleaning stubborn stains.

Customer Support Contact

Information on how to obtain assistance and contact customer service.

Related product manuals