BEFORE YOU BEGIN
กอนเริ่มการติดตั้ง
OPERATION INSTRUCTIONS
ขอแนะนําการใชงาน
Put your hand in the sensing -range, the
faucet should turn on. The faucet should
turn off after removal within 0.5-2 seconds.
The sensing will be adjusted automatically
as per the condition of the lavatory and
surrounding environment.
All information is based on the latest product information
available at the time of publication, Kohler Co. reserves
the right to make changes in product characteristics,
packaging, or availability at any time without notice.
Please leave these instructions for the consumer. They
contain important information.
NOTE:
1. Flush the water supply pipes thoroughly to remove
debris. Faucet is designed for tap water or potable
water.
2. Do not attack the faucet with rough strength to
avoid being damaged.
3. Do not damage the surface of sensing window when
installing or cleaning the faucet.
4. For new installations, install the faucet and drain to
the lavatory before installing the lavatory.
5. As for DC type faucets, please pay special attention
to insert direction match of battery poles. Tighten
the battery cover completely to prevent its
exposure to moisture.
6. As for AC type faucets, strictly follow indicated
instructions to perform electric connection. Only
provide electric supply to power box after the
installation is completed.
7. One AC/DC transformer for max.two faucets.
8. Electrical source must equiped with suitable fuse to
protect AC/DC transformer unit from damage.
9. Do not put the faucet near strong ultraviolet or
electromagnetic field.
10. Cover the sensing window with black tape when
repairing lavatories.
11. Turn off the electrical source and shut down water
supply before the faucet repaired.
ขอสังเกต:
MARGAUX TOUCHLESS LAVATORY FAUCET
กอกอางลางหนาระบบเซ็นเซอร รุนมารกอ ทัชเลส
K-15539X
INSTALLATION AND CARE GUIDE
ขอแนะนําการติดตั้งและการดูแลรักษา
©2014 Kohler Co.
1115767-X2-A
To Next Page
Need help?
General
