1115767-X2-A
©2014 Kohler Co.
1. Note of the Indicator Flashing
The indicator is the only and effective way to learn
the faucet's working conditions. So the users can
use the sensor faucet correctly with knowing the
meaning of the sensor indicator's flashing.
(1) Fast flashing means the faucet is in the period
of adjusting sensing distance after power on for
10 minutes. During these 10 minutes, please do
not put objects in the sensing range.
(2) The indicator flashes every 2 seconds: As for
DC type faucets, the symptom indicates that the
unit is out of battery and ceases working.
Recommend to replace batteries. As for AC type
faucets, there're two possibilities. One possibility
is that the unit is out of battery while the other
is that bad wire connection occurs to DC terminal
of the power box provided AC supply functions
normally.
(3) In normal condition, the water will flow and the
indicator will flash one time when objects are
inducted. (The indicator does not flash when
faucet stops flowing.)
2. Overtime Flowing Control
When the faucet works for about 1 minute
continuously, the water will be shut off automatically.
After that, objects must be removed from
the sensing range. Then the water will flow when
objects go into the sensing range again.
Otherwise, the faucet will not work.
3. Intelligent Stopping Flowing
Water will flow out when object are putted into
the sensing range. If the objects hold still for
15 seconds, the faucet will shut off automatically.
After that, objects must be removed from
the sensing range. Then the water will flow when
objects go into the sensing range again.
Otherwise, the faucet will not work.
1. ขอควรทราบเกี่ยวกับไฟแสดง
2.
ฟงกชั่นปองกันนํ้าลน
3.
ฟงกชั่นปดนํ้าอัตโนมัติ
Indicator
ระบบการทำงาน
OPERATION SYSTEM
To Next Page
Loading...
Need help?
General
