Why is the LCD display off on my Kohler Inverter controller?
If the controller LCD display on your Kohler Inverter is off, it could be due to low or no battery voltage. Check the connections and the generator set battery.
What causes loss of communication to accessory modules on a Kohler Inverter?
If you are experiencing loss of communication to accessory modules on your Kohler Inverter, check the wiring and connections. Also, verify that the cable size and length comply with the instructions in the Installation manual. Low or no battery voltage can also cause this issue, so check the battery connections and the generator set battery.
General| Model | RDC2 |
|---|---|
| Type | Portable Generator |
| Fuel Type | Gasoline |
| Starting System | Recoil |
| Voltage | 120 V |
| Outlet Types | 2 x 120V 20A GFCI Outlets |
To Next Page
