- 16 -
Replacement of batteries in remote controller
● The distance between signal sender and receiving window should be no more
than 8m, and there should be no obstacles between them.
●
NOTICE
1. Press the back side of remote controller marked
the cover of battery box along the arrow direction.
2. Replace two 7# (AAA 1.5V) dry batteries, and
make sure the position of "+" polar and "-" polar
are correct.
3. Reinstall the cover of battery box.
batterysignal sender
Cover of battery box
remove
reinstall
the
batteries.
●
When you don’t use the remote controller
for a long time, please take out
●
Replace new batteries of the same model when replacement is required.
conditioner when using the remote controller.
To Next Page
Loading...
