- 17 -
2
Select the fan speed LOW, MID, HIGH and AUTO in sequence.
4
TEMP/TIMER BUTTON
5
MODE BUTTON
6
FILTER BUTTON
1
ON/OFF BUTTON
Select the operation mode, COOL, DRY, FAN
(for reverse cycle model)
Operation starts when pressing this button, and stops
when pre
ssi
ng
this button again.
Press the keypad to increase the set (operating) temperature of the unit. and
Press the keypad to decrease the set (operating) temperature of the unit. The tem -
perature setting range is from 16~30℃.
Timer can be set by pressing / button. Timer can be set in 0.5hour increments
between 1 and 10 hours, or in 1 hour increments for 10 hours or above after each
push on or button.
This feature is a reminder to clean the Air Filter (See Care and Cleaning) for more
efficient operation and cooling. The LED (light) will illuminate after 250 hours of opera-
tion. To reset after cleaning the filter, press the "Filter" button and the light function
will go off.
Note: If wireless remote control is lost or broken, unit can be manually operated using
its surface display panel.
Control panel
3
FAN SPEED BUTTON
Activates the automatic air swing function
SWING BUTTON
To Next Page
Loading...
