I General
I.1 About this manual
This manual describes the digital servo amplifiers of the SERVOSTAR
®
600 series
(standard version, 1.5 to 20 Amps nominal current).
Note:
SERVOSTAR 601 is sold in Europe only
In this manual you can find information about:
l
Technical data of the servo amplifiers Chapter I
l
Assembly / installation Chapter II
l
Interfaces Chapter III
l
Setup the servo amplifier Chapter IV
l
Accessories Chapter V
l
Transport, storage, maintenance, disposal of the servo amplifiers Chapter VI
A more detailed description of the expansion cards which are currently available and the digital
connection to automation systems can be found on the accompanying CD-ROM in Acrobat-Reader
format (system requirements: WINDOWS > 95 with Internet browser, Acrobat Reader > 4.0) in Eng
-
lish, German, Italian and French versions.
You can print this documentation on any standard printer. A printed copy of the documentation is
available from us at extra cost.
This manual makes the following demands on qualified personnel :
Transport : only by personnel with knowledge in handling electrostatically
sensitive components.
Installation : only by electrically qualified personnel
Setup : only by personnel with extensive knowledge of electrical
engineering / drive technology
SERVOSTAR
®
601...620 Installation Manual 9
Seidel 06/02 General