.
MAINTENANCE
MAINTENANCE SCHEDULE CHART
MAINTENANCE SCHEDULE CHART
MAINTENANCE SCHEDULE CHART
INITIAL 250 HOURS SERVICE (ONLY AFTER THE FIRST 250 HOURS)
REPLACE TRANSMISSION OIL FILTER ELEMENT 4- 52
CHANGE OIL IN HYDRAULIC TANK, REPLACE HYDRAULIC FILTER ELEMENT 4- 61
WHEN REQUIRED
CHECK, CLEAN, OR REPLACE AIR CLEANER ELEMENT 4- 18
CLEAN INSIDE OF COOLING SYSTEM 4- 21
CHECK TRANSMISSION OIL LEVEL, ADD OIL 4- 24
CHECK AXLE OIL LEVEL, ADD OIL 4- 26
CHECK AXLE CASE BREATHER 4- 27
CLEAN CONDENSER OF AIR CONDENSER 4- 27
CHECK WINDOW WASHING FLUID LEVEL, ADD FLUID 4- 27
CLEAN RADIATOR FINS AND OIL COOLER FINS 4- 28
CHECK ELECTRICAL INTAKE AIR HEATER 4- 29
REPLACE BUCKET TEETH 4- 29
REPLACE BUCKET TOOTH WITH SEGMENT EDGE 4- 31
TURN, REPLACE BOLT-ON CUTTING EDGE 4- 32
LUBRICATE WORK EQUIPMENT CONTROL VALVE LINKAGE 4- 32
CHECK AIR CONDITIONER 4- 33
REPLACE SLOW BLOW FUSE 4- 34
SELECTION AND INSPECTION OF TIRES 4- 35
CHECK BEFORE STARTING
EVERY 50 HOURS SERVICE
DRAIN WATER, SEDIMENT FROM FUEL TANK 4- 38
EVERY 100 HOURS SERVICE
LUBRICATE REAR AXLE PIVOT PIN 4- 39
CHECK OIL LEVEL IN HYDRAULIC TANK, ADD OIL 4- 39
CLEAN ELEMENT IN AIR CONDITIONER FRESH AIR FILTER 4- 40
EVERY 250 HOURS SERVICE
CHECK BATTERY ELECTROLYTE LEVEL 4- 41
CHECK PARKING BRAKE 4- 43
CHECK ALTERNATOR BELT TENSION, ADJUST 4- 43
CHECK AIR CONDITIONER COMPRESSOR BELT TENSION, ADJUST 4- 44
CHECK FOR LOOSE WHEEL HUB NUTS, TIGHTEN 4- 44
CLEAN ELEMENT IN AIR CONDITIONER RECIRCULATION FILTER 4- 45
LUBRICATING 4- 45
4 - 15
To Next Page
Loading...
Need help?
General
