12.
OPERATION
1. Move
the fuel control lever to the % speed position (A) (mid range)
for
temperatures above 10°C (50°F). Move the engine speed control lever
to the full
speed position (B)
for temperatures below 10°C
(50°F).
2. Sound the horn to clear all personal
from the immediate area.
3. Turn the key of starting switch to the START position and release the
key the instant the engine starts.
4. The key will automatically return to the ON position.
REMARK
This switch incorporates a restart protection feature to prevent engage-
ment of the starter motor while the engine is running. Once the switch
has been returned to the ON position, the key must be moved to the
OFF position before it can be moved again to the START position.
REMARK
To prevent damage to the starter motor and avoid low battery output, do
not continuously crank the engine for more than 30 second intervals.
Allow at least 2 minute recovery period between cranking.
2-32
To Next Page
Loading...
