OPERATION MACHINE OPERATIONS AND CONTROLS
3-181
PARKING MACHINE 3
WARNING
q Avoid stopping suddenly. Give yourself ample room
when stopping.
q When stopping the machine, select flat hard ground
and avoid dangerous places.
If it is unavoidably necessary to park the machine on a
slope, insert blocks underneath the track shoes. As an
additional safety measure, thrust the bucket into the
ground.
q If the control lever is touched by accident, the machine
may move suddenly, and this may lead to a serious
accident.
Before leaving the operator's compartment, always set
the lock lever securely to LOCK position.
1. Put left and right travel levers (1) in the neutral position.
The machine stops.
2. Turn fuel control dial (2) to low idling position (MIN) and
lower the engine speed.
To Next Page
Loading...
Need help?
General
