Operation 3.2 Descriptions of the individual elements
WA80M-7, WA100M-7 – VENAM03001
3-43
3.2.10 Fuses
Turning fuses off while the ignition is on may cause damage
to components of the electrical system.
Switch the starting switch to the OFF position before replac-
ing fuses; only switch the battery main switch off once the
green pilot lamp on the relay box has gone out. Remove the
key to the battery main switch.
Fuses with improper ratings may cause cable fires or blow
again immediately.
Always replace defective fuses with fuses of the same rating.
The fuses protect the electrical system. Replace defective, cor-
roded, or loose fuses.
The fuses can be seen when the panel on the right side of the cab
is opened.