Konftel 300Mx - Sleep Mode; Software; Checking Status; Set Call Forwarding

26
SETTINGS
disruptions to calls and may extend the life of the battery. HD wideband audio is not available
when you are using GSM.

Select > SETTINGS > NETWORK > NETWORK MODE.

Select your choice and press OK to conrm.
SLEEP MODE
It is possible to deactivate the sleep mode.

Välj > SETTINGS > SLEEP MODE.

Select sleep mode to be ENABLED or DISABLED and conrm by pressing OK.
SOFTWARE
Upgrading
This menu option restarts the Konftel 300Mx in upgrade mode. See page 28.
Resetting
There is a menu option under SETTINGS that resets all settings to default. Please note that
this also deletes all contacts in the phonebook and all groups saved in the conference guide.

Select > SETTINGS > SOFTWARE > FACTORY RESET.

Conrm that you really want to reset the settings to default by pressing OK again, or
cancel the resetting procedure by pressing .
CHECKING STATUS
If you need to check the software version or serial number.

Select > STATUS.
SET CALL FORWARDING
Call forwarding is a service set up by the provider and is linked to the SIM card, not the
phone. You can check the current setting and change it from Konftel 300Mx by entering a
code according to the table below. Contact your service provider for more information.