2 sec
2 sec
2 sec
2 sec
2 sec
10
ADVANCED FUNCTIONS
These functions are only available if the telephone
supports them.
Last number redial
Press and hold the mute button for 2 seconds
until you hear a short audible signal.
Making a call using voice command
This is a function you can normally activate on your
telephone. If you have done this, you can also initiate
voice dial mode from Konftel 60W. More informa-
tion on voice dialing is contained in the telephone
handbook.
Press the + button for 2 seconds until you hear a
short audible signal.
Say the name of the person you wish to call.
Answering another call
This requires you to have set the telephone to receive
other calls during ongoing calls. You can also use the
buttons on your telephone to answer another call.
Press the + button for 2 seconds to put the cur-
rent call on hold and receive the incoming one.
Select between the calls by pressing the + button
for 2 seconds.
You can choose to end the current call and receive the
incoming one (or the call on hold if you have already
received a new call as above).
Press the trim button for 2 seconds to end the
current call and receive the incoming one.
USING BLUETOOTH
To Next Page
Loading...
