How to fix a Konica Minolta Copier when the copy image is too light?
If the Konica Minolta Copier's copy image is too light, manually adjust the copy density to a darker setting. Check the ADD TONER indicator and add toner if needed. Also, make sure the paper isn't damp, as paper should not be left in the copier for a long time in a humid place.
How to fix a Konica Minolta Copier when the copy image is too dark?
If the Konica Minolta Copier's copy image is too dark, manually adjust the copy density to a lighter setting.
What to do if Konica Minolta Copier image is not clean or shows spots?
If the Konica Minolta Copier's copy image is not clean or shows spots, use clean originals to avoid copying dirt marks. Keep the platen glass and the inner surface of the document cover clean. Check if the CALL FOR PM indicator light is lit or flashing and lighten the density if needed.
How to fix white lines on Konica Minolta Copier image?
To resolve white lines on the copy image of the Konica Minolta Copier, clean the corona wire using the wire cleaning knob.
What to do if Konica Minolta Copier does not operate when power switch is on?
If the Konica Minolta Copier doesn't start when you turn it on, try these steps: Press any key on the control panel to turn off Auto Shut Off. Make sure the paper trays are fully inserted, or the START PRINT light will stay amber. Also, check that the plug is securely in the electrical socket.
Why is Konica Minolta Copier not copying after pressing start print?
If copies are not being made after pressing start on the Konica Minolta Copier, ensure the correct paper tray for the selected copy size is properly inserted and adjusted. Make sure the document cover and front door are completely closed.
What to do if ADD PAPER indicator light is flashing on Konica Minolta Copier?
If the Konica Minolta Copier shows the 'ADD PAPER' light flashing, check the paper supply in the paper tray(s) and replenish as needed.
Why does Konica Minolta Copier paper mishandle during copying?
If the Konica Minolta Copier's copy paper mishandles during copying, fan the copy paper and load it with the curl side up. Make sure the paper stack does not exceed the tray's capacity.
What does it mean when the ADD TONER light is flashing on Konica Minolta Copier?
If the Konica Minolta Copier shows the 'ADD TONER' light flashing, a new toner supply is needed. Follow the instructions for adding toner.
What to do if original paper is mishandled in the ADF of Konica Minolta Copier?
If the original paper is mishandled in the ADF of the Konica Minolta Copier, make sure the originals meet the recommended size and weight. Remove any staples from the originals and align them evenly in the ADF.
General| Type | Digital Copier |
|---|---|
| Warm-up Time | 30 seconds |
| Resolution | 600 x 600 dpi |
| Paper Input Capacity | 250 sheets |
| Original Size | A3 |
| Paper Size | A3 to A5 |
| Multiple Copy | 1-99 copies |
| Interface | Parallel |
| Printing Speed | 12 ppm (A4) |
| Paper Weight | 64-128 gsm |
To Next Page
