How to fix skewed copy image when bypass is used on Konica Minolta Copier?
To resolve a skewed copy image when using the bypass on the Konica Minolta Copier, make sure the copy paper is inserted straight.
How to fix a Konica Minolta Copier when the copy image is too dark?
If the Konica Minolta Copier's copy image is too dark, manually adjust the copy density to a lighter setting.
What to do if Konica Minolta Copier image is not clean or shows spots?
If the Konica Minolta Copier's copy image is not clean or shows spots, use clean originals to avoid copying dirt marks. Keep the platen glass and the inner surface of the document cover clean. Check if the CALL FOR PM indicator light is lit or flashing and lighten the density if needed.
How to fix white lines on Konica Minolta Copier image?
To resolve white lines on the copy image of the Konica Minolta Copier, clean the corona wire using the wire cleaning knob.
What to do if Konica Minolta Copier does not operate when power switch is on?
If the Konica Minolta Copier doesn't start when you turn it on, try these steps: Press any key on the control panel to turn off Auto Shut Off. Make sure the paper trays are fully inserted, or the START PRINT light will stay amber. Also, check that the plug is securely in the electrical socket.
Why is Konica Minolta Copier not copying after pressing start print?
If copies are not being made after pressing start on the Konica Minolta Copier, ensure the correct paper tray for the selected copy size is properly inserted and adjusted. Make sure the document cover and front door are completely closed.
What to do if copy size indicator is flashing on Konica Minolta Copier?
If the COPY SIZE indicator is flashing on the Konica Minolta Copier, the selected paper size is not installed in the machine.
What to do if ADF indicator will not light after auto/reset is pressed on Konica Minolta Copier?
If the ADF indicator on the Konica Minolta Copier will not light after pressing AUTO/RESET, ensure that the ADF is fully closed.
Why magnification cannot be changed on Konica Minolta Copier?
If the magnification cannot be changed on the Konica Minolta Copier, press AUTO to reset the copier. Note that Shift, Reduce & Shift, and Book Copy functions cannot be selected.
What to do if original paper is mishandled in the ADF of Konica Minolta Copier?
If the original paper is mishandled in the ADF of the Konica Minolta Copier, make sure the originals meet the recommended size and weight. Remove any staples from the originals and align them evenly in the ADF.
Instructions to avoid risks and ensure safe operation of the copier.
Explanation of DANGER, WARNING, CAUTION symbols and machine safety labels.
Guidelines for safe installation including environment, ventilation, and space.
Precautions for plug sockets, power cords, and extension cords.
Safety advice on handling internal components, abnormal conditions, and modifications.
Checklist for periodic safety checks of the copier and electrical connections.
Explanation of the functions of each button and indicator on the control panel.
Specification of space and environmental requirements for copier installation.
Step-by-step guide on powering on the copier and its warm-up process.
Instructions for placing originals and making copies using the platen glass.
Guide for using the ADF to copy multiple originals efficiently.
Step-by-step guide for creating two-sided copies from one-sided originals.
Instructions for copying two-sided originals to produce two-sided copies.
Guidance on contacting service, ordering supplies, and troubleshooting.
Instructions for cleaning platen glass, cover, and ADF belt.
Procedure for cleaning the corona wire to maintain copy quality.
Instructions on loading paper into various trays, including LCT and user-adjustable.
Step-by-step guide on how to add toner to the copier.
Information on preventive maintenance schedules and reading PM count.
Explanation of user codes and their solutions for quick correction.
Identification of mishandled paper locations and associated J Codes.
Detailed procedures for removing mishandled paper based on specific codes.
Instructions for clearing jammed staples from the in-bin and off-line staplers.
Solutions for common problems like copier not operating or poor copy quality.
General| Type | Digital Copier |
|---|---|
| Warm-up Time | 30 seconds |
| Resolution | 600 x 600 dpi |
| Paper Input Capacity | 250 sheets |
| Original Size | A3 |
| Paper Size | A3 to A5 |
| Multiple Copy | 1-99 copies |
| Interface | Parallel |
| Printing Speed | 12 ppm (A4) |
| Paper Weight | 64-128 gsm |
To Next Page
