What to do if Konica Minolta Copier can't make copies after removing mishandled paper?
If copies cannot be made after removing mishandled paper from the Konica Minolta Copier, remove the mishandled paper from all positions indicated by a flashing light on the control panel diagram.
Why magnification cannot be changed on Konica Minolta Copier?
If the magnification cannot be changed on the Konica Minolta Copier, press AUTO to reset the copier. Note that Shift, Reduce & Shift, and Book Copy functions cannot be selected.
How to fix skewed copy image when bypass is used on Konica Minolta Copier?
To resolve a skewed copy image when using the bypass on the Konica Minolta Copier, make sure the copy paper is inserted straight.
General| Type | Digital Copier |
|---|---|
| Warm-up Time | 30 seconds |
| Resolution | 600 x 600 dpi |
| Paper Input Capacity | 250 sheets |
| Original Size | A3 |
| Paper Size | A3 to A5 |
| Multiple Copy | 1-99 copies |
| Interface | Parallel |
| Printing Speed | 12 ppm (A4) |
| Paper Weight | 64-128 gsm |
Instructions to avoid risks and ensure safe operation of the copier.
Explanation of DANGER, WARNING, CAUTION symbols and machine safety labels.
Guidelines for safe installation including environment, ventilation, and space.
Precautions for plug sockets, power cords, and extension cords.
Safety advice on handling internal components, abnormal conditions, and modifications.
Checklist for periodic safety checks of the copier and electrical connections.
Explanation of the functions of each button and indicator on the control panel.
Specification of space and environmental requirements for copier installation.
Step-by-step guide on powering on the copier and its warm-up process.
Instructions for placing originals and making copies using the platen glass.
Guide for using the ADF to copy multiple originals efficiently.
Step-by-step guide for creating two-sided copies from one-sided originals.
Instructions for copying two-sided originals to produce two-sided copies.
Guidance on contacting service, ordering supplies, and troubleshooting.
Instructions for cleaning platen glass, cover, and ADF belt.
Procedure for cleaning the corona wire to maintain copy quality.
Instructions on loading paper into various trays, including LCT and user-adjustable.
Step-by-step guide on how to add toner to the copier.
Information on preventive maintenance schedules and reading PM count.
Explanation of user codes and their solutions for quick correction.
Identification of mishandled paper locations and associated J Codes.
Detailed procedures for removing mishandled paper based on specific codes.
Instructions for clearing jammed staples from the in-bin and off-line staplers.
Solutions for common problems like copier not operating or poor copy quality.
To Next Page
