Konica Minolta AD-509 User Manual

AD-509
Automatic Duplex Unit
INSTALLATION MANUAL
Applied Machines: 225i/205i; 236/226/206; 235/215/195
MFP: 23 ppm/22 ppm/21 ppm/20 ppm/19 ppm
Product Code: ACN2/ACN3; A8A5/A8A6; A3PE/A3R2
E-12019. 7 Printed in China A3PG-9950-03
1CA0835001
1. Pre-installation check items
■ General checks
• Refer to “Pre-installation check items” described
in the installation manual of the main body.
• Be sure to turn OFF the main power switch of
the main body and unplug the power cord before
starting the installation.
• Do not turn the power ON before the instruction.
■ Notice about this option
● Tools/jigs required for installation
• Stubby driver
■ Notice about description contents of the
manual
• This manual provides the illustrations of the ac-
cessory parts and machine that may be slightly
different in shape from yours.
In that case, instead of the illustrations, use the
appearance of your machine to follow the instal-
lation procedure. This does not cause any signif-
icant change or problem with the procedure.
• If none of the later steps instruct you to use the
parts including screw and cover that you re-
moved following the instructions described in this
manual, discard them.
2. Accessory parts
No. Name Shape Q’ty
1. Automatic du-
plex unit
1
2. Transport guide 1
No. Name Shape Q’ty
3. Cooling fan as-
sembly
1
4. Metal plate 2
5. Wire saddle 1
6. Screw A (3 x 8
mm)
1
7. Screw B (3 x 8
mm)
3
8. Installation
manual
1 set
WARNING
Keep this bag away from babies and chil-
dren. Do not use in cribs, beds, carriages,
or playpens.
The thin film may cling to nose and mouth
and prevent breathing. This bag is not a
toy.

Konica Minolta AD-509 Specifications

General

Type	Automatic Document Feeder
Capacity	100 sheets
Original Size	A3
Original Weight	35 - 128 gsm
Document Capacity	100 sheets
Supported Paper Sizes	A3
Scanning Resolution	600 x 600 dpi
Compatible Models	Konica Minolta Bizhub

Summary

Pre-installation Checks

General Checks

Ensures main power is off and cord is unplugged before starting installation.

Tools and Manual Notices

Lists required tools like a stubby driver and notes about illustration differences and part handling.

Accessory Parts

Automatic Duplex Unit and Transport Guide

Lists the automatic duplex unit and transport guide as essential accessory parts.

Additional Installation Hardware

Details other required parts: cooling fan, metal plates, wire saddle, and screws.

Installation Procedures

Initial Disassembly and Preparation

Covers powering off, removing initial covers, and disconnecting connectors.

Attaching Main Components

Details attaching the transport guide, metal plates, and positioning the duplex unit.

Wiring and Cable Management

Explains routing and connecting wires, harnesses, and cables using saddles and edge covers.

Final Reassembly and Fan Installation

Covers reattaching covers, reinstalling trays, and connecting the cooling fan assembly.