Konica Minolta DF-704 - User Manual

E-1
DF-704 Dual Scan Document Feeder
INSTALLATION MANUAL
A87R-9550-00
Applied Machines: C368/C308
COLOR MFP: 36 ppm/30 ppm
Product Code: A7PU/A7PY
Caution:
Lifting the machine in an awkward position or
transporting it in a poorly balanced position could
result in personal injury. When transporting the
machine, assign an adequate number of persons
to the job and ensure that each person can take a
good position of not being excessively loaded.
(mass: approx. 12 kg (26-7/16 lb))
1. Accessory parts
Note:
This manual provides the illustrations of the acces-
sory parts and machine that may be slightly differ-
ent in shape from yours. In that case, instead of
the illustrations, use the appearance of your
machine to follow the installation procedure. This
does not cause any significant change or problem
with the procedure.
2. Installation procedures
(1) Turn OFF the power switch and unplug the
power cord from the power outlet.
(2) Hold the dual scan document feeder as shown in
the illustration and remove it from the carton.
Note:
To prevent breakage, do not hold the dual scan
document feeder by the four corners.
No. Name Shape Q’ty
1. Dual scan
board
1
2. Hinge cover
(large)
1
3. Hinge cover
(small)
1
4. Shoulder
screw A
2
5. Shoulder
screw B
2
6. Mounting
screw
2
7. Chart
1
8. Installation
manual
1 set
Keep this bag away from babies and
children. Do not use in cribs, beds,
carriages, or playpens.
The thin film may cling to nose and
mouth and prevent breathing. This bag is
not a toy.

Summary

DF-704 Dual Scan Document Feeder Installation Procedures

DF-704 Dual Scan Document Feeder Configuration Procedures

DF-704 Dual Scan Document Feeder Adjustment Procedures

Adjusting the Height

Checks clearance between scanner and feeder protrusion.

Zoom Ratio Adjustment

Adjusts zoom ratio using service mode and charts.

Adjusting DF Skew (1-Side)

Adjusts document feeder skew for single-sided scanning.

Adjusting DF Skew (2-Side)

Adjusts document feeder skew for double-sided scanning.

Auto Stop Position Adjustment

Adjusts the auto stop position for document feeding.

Changing the Stopper Position

Changes the position of the stopper on the document feeder hinge.

SP-501 Stamp Unit Accessory Parts

SP-501 Stamp Unit Installation Procedures

SP-501 Stamp Unit Configuration Procedures

Konica Minolta DF-704 Specifications

General

Sheet Capacity (Feeder)	100 sheets
Type	Document Finisher
Max Paper Capacity (Finisher)	3, 000 sheets
Stapling	Yes
Capacity (Feeder)	100 sheets
Original Types (Feeder)	Paper
Compatibility	Compatible with various Konica Minolta multifunction printers