To Next PageTo Next Page
Need help?Do you have a question about the Konica Minolta LU-302 and is the answer not in the manual?
Configure paper size settings in Service Mode for correct paper handling.
Verify and adjust the paper reference position for accurate print alignment.
Configure paper size settings in Service Mode for correct paper handling.
Verify and adjust the paper reference position for accurate print alignment.
This document outlines the installation and adjustment procedures for the LU-302 Large Capacity Unit, an accessory designed to enhance the paper handling capabilities of compatible multifunction printers (MFPs). The unit is intended for use with Applied Machines C368/C308 COLOR MFPs.
The LU-302 Large Capacity Unit serves as an additional paper source, significantly increasing the total paper capacity of the MFP. This allows for longer uninterrupted print runs and reduces the frequency of paper replenishment, which is particularly beneficial in high-volume printing environments. The unit integrates seamlessly with the main body of the MFP, providing a stable and reliable platform for paper feeding. It is designed to work in conjunction with existing paper feed cabinets such as the PC-410, PC-210, or PC-110, which must be installed prior to the LU-302.
The installation process involves several steps, starting with the preparation of the existing paper feed cabinet. This includes removing various covers and knockouts to create space and access points for the new unit's components. Key accessory parts, such as rails, mounting brackets, and screws, are provided to secure the large capacity unit to the main body and the paper feed cabinet. The unit's harness connects to the paper feed cabinet's connectors, ensuring proper communication and power supply.
Once physically installed, the LU-302 requires configuration to recognize the loaded paper size. This is done through the MFP's Service Mode, where users can specify the paper dimensions to ensure correct operation.
A critical aspect of the installation is the height adjustment of the large capacity unit. This ensures a precise clearance between the LU-302 and the main body of the MFP, preventing physical interference and ensuring smooth paper feeding. The adjustment involves manipulating roller screws and lock nuts on both sides of the unit to achieve the specified clearance.
Furthermore, the manual details procedures for adjusting the paper reference position, which is crucial for accurate image centering on printed pages. This adjustment is performed by printing test patterns and measuring the width of the test pattern, then making fine adjustments to the paper guide side plates within the large capacity unit.
The LU-302 Large Capacity Unit is designed for straightforward paper loading and operation. To load paper, the upper door of the unit is opened, and the paper feed roller is raised. A stack of paper is then placed inside and aligned to the left side of the unit. It is important to ensure that the height of the stacked paper is lower than the level where the paper aligning plate starts to bend outward, preventing potential paper jams or feeding issues. After loading, the paper feed roller is lowered, and the upper door is closed.
The unit's integration with the MFP's control system allows for the selection of the large capacity unit as a paper source for print jobs. The configuration procedures ensure that the MFP accurately recognizes the paper size loaded in the LU-302, preventing misfeeds and ensuring correct printing.
The design emphasizes user safety, with warnings about proper lifting techniques during installation to prevent personal injury due to the unit's weight. Additionally, a warning about the plastic bag used for packaging highlights the importance of keeping it away from children to prevent suffocation.
While the manual primarily focuses on installation and initial setup, it implicitly covers aspects related to ongoing maintenance through its adjustment procedures. The height adjustment and paper reference position adjustments are critical for maintaining optimal performance over time. If the clearance between the main body and the large capacity unit becomes incorrect, or if printouts show image centering issues, these adjustments can be revisited to restore proper functionality.
The modular design, with removable covers and accessible components, facilitates potential servicing or troubleshooting. For instance, the instructions for removing the front, rear, and lower right covers of the paper feed cabinet, as well as the right cover of the large capacity unit, suggest that these areas might need to be accessed for maintenance or repair.
The manual also provides guidance on handling parts that are removed during installation. It states that if later steps do not instruct the user to reuse removed parts (including screws and covers), they should be discarded. This helps prevent clutter and ensures that only necessary components are retained.
The detailed steps for connecting the unit's harness and ground wire, along with routing the harness through wire saddles, ensure a secure and organized internal setup, reducing the risk of electrical issues or cable damage that could lead to maintenance problems.
In summary, the LU-302 Large Capacity Unit is a robust accessory designed to enhance the paper capacity and efficiency of compatible MFPs. Its installation and adjustment procedures are meticulously detailed to ensure proper integration, reliable operation, and ease of maintenance, contributing to a seamless printing experience in demanding environments.
General| Measurement Range | Not Applicable |
|---|---|
| Measurement Geometry | Not Applicable |
| Light Source | Not Applicable |
| Interface | Not Applicable |
| Compatibility | Konica Minolta |
| Yield | Not Applicable |
