Konica Minolta bizhub 160 User Manual (English)

Other manuals for Konica Minolta bizhub 160

Service Manual376 pages

User Guide156 pages

Parts Guide Manual35 pages

Questions and Answers:

J
jean35Jul 29, 2025
What to do if the data is received, but not printed on Konica Minolta Scanner?
- R
  Rachel HamiltonJul 29, 2025
  If your Konica Minolta Scanner receives data that isn't printing, it could be due to a couple of reasons. It's possible that the scanner received an email with an incompatible file format or no data at all. In this case, ask the sender to send a TIFF-F file or text. Another possibility is that the memory is full. Try printing saved documents and reducing the amount of memory used, then ask the sender to resend the data.
D
Danielle RodriguezAug 2, 2025
What to do if transmission is possible, but the image cannot be outputted at the recipient’s terminal or computer from Konica Minolta Scanner?
- R
  Robert JohnsAug 2, 2025
  If your Konica Minolta Scanner can transmit, but the recipient can't output the image, it might be because their terminal can't handle the sent image. Try changing the size, resolution, and coding method to settings supported by the recipient's terminal, and then resend the data. Also, if you're using email, ensure you insert text into the document, as some email applications may not open attachments without accompanying text.
A
Andre BellAug 7, 2025
Why is reception not possible on my Konica Minolta Scanner?
- L
  laurendiazAug 7, 2025
  Reception issues with your Konica Minolta Scanner can stem from several causes. First, incorrect connections could be the culprit, so check the LED indicator on the hub and verify all connections. Ensure that the necessary network settings are registered on the device. A damaged LAN cable can also prevent reception; try replacing it. Also, verify that the POP3 username isn't being used by another email application or user. Finally, if the setting to automatically check for new emails is disabled, specify a time interval for automatic checks or receive manually.
H
hallmarkAug 11, 2025
Why is transmission not possible with my Konica Minolta Scanner?
- D
  Dan TaylorAug 11, 2025
  If transmission is not possible on your Konica Minolta Scanner, it could be due to a few reasons. First, check the LED indicator on the hub and the connections to ensure they are correct. Second, verify that the necessary network settings for the device are registered. Finally, a damaged LAN cable can also cause this issue, so consider replacing it.
G
Gwendolyn PughAug 15, 2025
What to do if the same document is received many times from Konica Minolta Scanner?
- L
  Lauren TaylorAug 15, 2025
  If your Konica Minolta Scanner is receiving the same document repeatedly, it's likely because the mail size is too large, causing the connection with the server to time out during data reception. To resolve this, specify that the data be kept on the computer, and delete the corresponding email messages from the server. Also, ask the sender to try sending smaller email messages.
D
derek99Aug 19, 2025
What to do if an interruption in the transmission was specified, but the transmission was not interrupted on Konica Minolta Scanner?
- E
  ebryantAug 19, 2025
  If you specified an interruption in transmission on your Konica Minolta Scanner, but it wasn't interrupted, it may be because it takes some time to interrupt an Internet fax transmission. Wait until the transmission is interrupted.
T
Theresa BarrettAug 25, 2025
What to do if an interruption in the reception was specified, but the reception was not interrupted on Konica Minolta Scanner?
- M
  Michael OneillAug 25, 2025
  If you specified an interruption in reception on your Konica Minolta Scanner, but the reception was not interrupted, it may be because it takes some time to interrupt an Internet fax reception. Wait until the reception is interrupted.