What does SECURE PRINT IS NOT AVAILABLE mean on Konica Minolta bizhub 169 All in One Printer?
If your Konica Minolta All in One Printer displays 'SECURE PRINT IS NOT AVAILABLE', it means the expanded memory unit is not installed, so the 'Secure Print' setting cannot be used. The job is cancelled.
What to do if Konica Minolta bizhub 169 says NOT ACCEPTED PASSWORD?
If your Konica Minolta All in One Printer says 'NOT ACCEPTED PASSWORD', it means the secure print password you entered is incorrect, and the document cannot be printed. Type in the correct password.
Why are there streaks in my Konica Minolta bizhub 169 All in One Printer copies?
Streaks in copies from your Konica Minolta All in One Printer can occur for several reasons: * If you're copying a thin double-sided document, the information on the back might be showing through. In this case, press the [Density] key and select a lighter density setting. * The original glass may be dirty. Wipe it with a soft, dry cloth. * The document pad may be dirty. Clean it with a soft cloth dampened with a mild detergent. * If the original document is printed on highly translucent material, place a blank sheet of paper on top of the document.
Why is my Konica Minolta bizhub 169 showing MEMORY FILE FULL XXXX Server?
The 'MEMORY FILE FULL' error message means that while receiving e-mail, the maximum number of files stored in the memory was exceeded. To resolve this, retrieve the reception data stored in the memory.
What to do if Konica Minolta bizhub 169 All in One Printer shows COMMUNICATION ERROR (####) (PRESS ANY KEY)?
If you see a COMMUNICATION ERROR, it could be due to a problem with the machine or the recipient/caller's fax machine. Press any key to check the details of the error in the printed transmission or reception report. Then, check the communication settings, and try communicating again.
What to do if Konica Minolta All in One Printer displays MEM.FULL/RX CANCEL?
If the Konica Minolta All in One Printer displays 'MEM.FULL/RX CANCEL', it means that when receiving e-mail, the size of the image data exceeded the capacity of the memory. To solve this, retrieve the reception data stored in the memory.
How to fix 'MEMORY NEAR FULL' error on Konica Minolta All in One Printer?
The 'MEMORY NEAR FULL' error means the image data from your computer exceeds the printer's memory capacity. Press any key. Then, turn the printer off and on again.
Why is 'SECURE PRINT IS NOT AVAILABLE' on my Konica Minolta All in One Printer?
Since the expanded memory unit is not installed, the “Secure Print” setting cannot be selected, and the job is cancelled.
Why is my Konica Minolta bizhub 169 All in One Printer showing PRINT CANCEL XXXX Server?
The 'PRINT CANCEL' error indicates that an e-mail message was received that cannot be printed by this machine. To resolve this, ask the sender to send a TIFF-F file or text in the correct format.
How to troubleshoot Konica Minolta All in One Printer that cannot be turned on?
If your Konica Minolta All in One Printer won't turn on: * Check if the power supply cord has been unplugged from the electrical outlet and plug it in. * See if the breaker for the electrical circuit has been tripped and close it.
General| Brand | Konica Minolta |
|---|---|
| Model | bizhub 169 |
| Category | All in One Printer |
| Language | English |
To Next Page