Precaution
3
bizhub 163/211 3-13
3.3 Control panel parts and their functions
Names of control panel parts and their functions
123 4 56
7
8
9
101112131415161718
19
20
21
No. Part name Description
1 [Power Save] key/in-
dicator
Press to enter Power Save mode. (See p. 3-21.)
2 [Mixed Original]
key/indicator
Press to select the "Mixed Original" setting.
3 Simplex/Duplex
key/indicator
Selects double-sided copying. Select "1-SIDE%1-SIDE", "1-
SIDE%2-SIDE", 2-SIDE%1-SIDE or "2-SIDE%2-SIDE". If any set-
ting other than "1-SIDE%1-SIDE" is selected, the indicator lights
up.
4 Display Displays the number of copies, zoom ratio, setting menus and er-
ror messages.
5[+], [,], [*] and [)]
keys
[OK] key
Press the [+], [,], [*] and [)] keys to select menu items in the dis-
play and change their settings.
Press the [OK] key to apply the setting.
6 [Printer] key/indicator This indicator lights up while data is being printed from the com-
puter and flashes while data is being sent. For details, refer to the
user manual for the printer driver.
7 [Access] key Press when account track settings have been applied. (See
p. 6-34.)
8 [Speed Dial] key Press to register frequently used addresses, and to recall them
during transmissions. (Available only if image controller IC-206 or
network interface card NC-503 is installed.)
9 [Phone Book] key Press to display the information programmed for speed dialing.
10 [Back] key Press to return to the previous screen.
11 "Caution" indicator This indicator lights up or flashes if an error has occurred. For de-
tails, refer to "8 When a message appears".
To Next Page
Loading...
Need help?
General
