Konica Minolta BIZHUB PRO 1050 Service Manual (English)

Other manuals for Konica Minolta BIZHUB PRO 1050

User Manual510 pages

Operator's Manual844 pages

User Guide479 pages

Setup Instructions14 pages

Questions and Answers:

W
Whitney HendersonAug 20, 2025
How to fix Konica Minolta Printer when transferred file is not displayed?
- K
  kunderwoodAug 21, 2025
  If, after selecting an item in the combo box, the transferred file is not displayed on your Konica Minolta Printer, first verify that the file is stored in the folder shown in the "Folder" text box of "Select version." If not, use the "File copy" function. Also, check the data folder setting in the option screen. Ensure the file name hasn't been changed, as this makes the file unavailable. Similarly, if the folder name created by the "Create folder" button has been altered, revert it to its original state.
M
Monica BarrAug 22, 2025
Why does my Konica Minolta Printer say 'The transmission to the LPT port failed'?
- J
  Jeffrey ScottAug 22, 2025
  If the Konica Minolta Printer displays an error stating "The transmission to the LPT port failed," it could be due to several reasons. First, ensure the cable is securely connected and undamaged. Second, verify that the receiving mode on the copier matches the transferred file information on the file information screen. Third, confirm that the cable length is less than 2 meters. Fourth, check your PC manual to disable the ECP mode on the parallel port. Finally, there may be a compatibility issue between the parallel port of the PC and the port on the copier; test with a PC known to transmit successfully to check for compatibility problems.
E
elizabeth57Aug 25, 2025
What to do if Konica Minolta Printer shows an error 'The file cannot be opened'?
- N
  Nicholas TateAug 25, 2025
  If your Konica Minolta Printer displays an error stating, "The file cannot be opened," it is possible that another program or system is currently using the file. To resolve this, exit any other programs that might be using the file. If the error persists, try rebooting Windows.
T
thompsonderrickAug 26, 2025
Why Konica Minolta Printer shows error 'Term Test file cannot be sent'?
- K
  Kevin CuevasAug 26, 2025
  If your Konica Minolta Printer displays an error stating "Term Test file cannot be sent," it could be due to a loose cable connection. Check the cable to ensure it is securely connected and undamaged. Alternatively, the main body of the printer might not be in the receiving condition, so verify that it is.
K
kelly59Aug 28, 2025
What does 'NG' mean on Konica Minolta Printer file check?
- N
  njohnsonAug 28, 2025
  If your Konica Minolta Printer displays "NG" during the file check, it indicates that the transferred file is damaged. To resolve this, copy the file again and recheck it. If "NG" continues to appear, it is recommended to contact the file's supplier for assistance.
A
April GriffithAug 29, 2025
What does '??' mean on Konica Minolta Printer file check?
- J
  Jeffery NicholsAug 29, 2025
  If your Konica Minolta Printer displays "??" during the file check, it means that when the transferred file was copied to the PC, the copying of the checksum file (*.SUM) was not done. Copy the checksum file to the same location as the transferred file. If you use the "Copy a file" function, a copy is made automatically.
M
Misty KaufmanAug 31, 2025
Why is my Konica Minolta Printer screen displayed in English?
- L
  Leah HintonAug 31, 2025
  If the screen of your Konica Minolta Printer is displayed in English, it could be due to a damaged Japanese DLL [RCJP.DLL]. In this case, set it up again. Alternatively, the ISWTrns.INI file might be set incorrectly, potentially using an English version INI file. Check the ISWTrns.INI file to resolve this.
C
Charlene AndersonSep 2, 2025
What to do if ISWTrns does not start on Konica Minolta Printer?
- W
  William WhiteSep 2, 2025
  If the ISWTrns does not start up on your Konica Minolta Printer, it may be because the ISWTrns file is damaged. If this occurs, set it up again. Another possible cause is a damaged setup disk. In this case, check the setup disk and set it up again.
C
Crystal OwensSep 3, 2025
What to do if the 'Add toner' message is displayed on my Konica Minolta All in One Printer?
- N
  Nicholas HuberSep 4, 2025
  If the 'Add toner' message appears on your Konica Minolta All in One Printer, this indicates that a new toner supply is required. Please follow the provided instructions for adding toner to resolve this issue.
C
Cynthia EstradaSep 5, 2025
What to do if the MACHINE tab blinks orange for 'Tray Empty' on my Konica Minolta BIZHUB PRO 1050 All in One Printer?
- R
  rodney86Sep 5, 2025
  If the MACHINE tab on your Konica Minolta All in One Printer blinks in orange and indicates 'Tray Empty', either change the tray selection or supply the empty tray with copy paper.

Konica Minolta BIZHUB PRO 1050 Specifications

General

Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	300, 000 pages
Standard Paper Capacity	3, 000 sheets
Duplex Printing	Yes
Supported Operating Systems	Windows, Mac OS, Linux
Warranty	1 year
Print Speed	105 ppm
Connectivity	Ethernet, USB
Paper Size	A3, A4, A5, B4, B5, Legal, Letter