Need help?Do you have a question about the Konica Minolta BIZHUB PRO 1050P and is the answer not in the manual?
General| Print Resolution | 1200 x 1200 dpi |
|---|---|
| Weight | 485 lbs |
| Duplex Printing | Yes |
| Connectivity | Ethernet, USB |
| Operating System Compatibility | Windows, Mac, Linux |
| Type | Laser |
| Print Technology | Laser |
| USB Ports | USB 2.0 |
Covers laser safety, ozone release, and electromagnetic interference for various regions.
Details safety labels and indicators attached to machine areas to prevent injury.
Specifies required space for machine operation, parts replacement, and inspection.
Describes external and internal machine items, including trays, panels, and switches.
Explains the procedure for turning the main and sub power switches on and off.
Details how to set up user names and passwords for data access and print quantity limits.
Lists the weight specifications for various paper types supported by trays and equipment.
Outlines the sheet capacity for different trays, finishers, and stackers.
Details available paper sizes for trays, finishers, and other equipment.
Provides instructions on how to load paper into the machine's trays.
Explains the procedure for replacing the toner bottle when it runs low.
Describes the screen that displays machine status and job information.
Details how to check, control, suspend, delete, or restart reserved jobs.
Explains output modes like non-sort, collated, uncollated, and staple for the FS-503 Finisher.
Details available punch patterns and folding types offered by the FD-501 Folding Unit.
Explains how to access and use the Paper Set, Adjustment, and Controller screens.
Details the procedure for registering paper types and weights for each tray.
Explains how to configure paper sizes, conditions, and air assist for each tray.
Covers procedures for adjusting magnification for both sides of the paper.
Details the adjustment procedure for controlling magnification on Side 2 for paper feed direction.
Explains how to control magnification perpendicular to paper feed for Side 1.
Covers procedures for controlling the restart timing for Side 1 and Side 2.
Details how to control image centring in the direction of paper feed.
Explains fine adjustments for stapler position, multi-folder punch/fold, and stacker options.
Covers various printer settings including PDL, paper feed, output tray, duplex, binding, staple, and punch.
Explains how to select default port numbers and output formats for each port.
Introduces user and machine manager settings accessible via the Utility Menu.
Covers language selection, buzzer settings, indication times, default screen, auto reset, and key response.
Details feed tray auto selection, ATS permit, and other function settings like image shift.
Describes items settable by the machine manager and the procedure.
Covers power save, time/date, weekly timer, and management list print settings.
Details authentication methods, section management, and volume tracking.
Covers NIC, TCP/IP, NetWare, IPP, FTP, SNMP, SMB, AppleTalk, E-Mail, SSL/TLS settings.
Details machine manager password, HDD lock, and security strengthen mode settings.
Introduces the device control utility for managing printer status and settings.
Explains how to log into and use the Administrator Mode for system configuration.
Describes how to view and change administrator password and device information.
Details interface settings, port settings, and default printer settings like PCL, PS, and TIFF.
Covers TCP/IP, NetWare, IPP, FTP, SNMP, SMB, AppleTalk, E-Mail, SSL/TLS, and authentication settings.
Explains normal mode and security strengthen mode for device protection.
Describes data protection, enhanced passwords, access control, and audit logs.
Explains setting up user names and passwords for authentication.
Covers storing scanned data securely using password-protected boxes.
Details turning security strengthen mode ON/OFF and managing passwords.
Guides users on how to respond to service messages and find report codes.
Provides step-by-step instructions for removing jammed paper from various locations.
Explains common machine errors like paper misfeed, tray empty, and preset inconsistencies.
Offers general tips for common operating issues like no power, light print, or paper mishandling.
Explains how to view and print various machine counters like total, paper feed, and developer counts.
Informs about the requirement for preventive maintenance after a set number of prints.
Lists the specifications for the main body of the bizhub PRO 1050P.
Details specifications for optional equipment like paper feeders, stackers, and finishers.
Details methods for searching boxes/files using Box No., Folder Name, or Direct Call.
Explains technical terms and abbreviations used in the manual.
Provides an alphabetical index of terms and their corresponding page numbers.
To Next Page
