3
Basic copy operation
3-54 200/250/350
Basic copy operation Chapter 3
1 In the Basics screen,
touch [Finishing].
The Finishing screen ap-
pears.
2 Touch [Sort].
Separating copies by pages (“Group” setting)
0 The factory default setting is “Non-Sort”.
0 If “Group” is selected while no finisher is installed, printed copies will be
fed out and grouped in an alternating crisscross pattern if the following
conditions are met.
- Letter or 5-1/2 × 8-1/2 paper is used.
- Paper of the same size and type is loaded with the w orientation in one
paper tray and with the v orientation in another tray.
- The “Auto Paper Select” setting is selected.
- The “Mixed Original” setting is not selected.
If “Group” is selected and the finisher is installed, copies are fed out shift-
ed to separate them.
To Next Page
Loading...
Need help?
General
