Application functions
8
200/250/350 8-33
Application functions Chapter 8
To check the overlay image
The stored image can be printed from the Image Overlay screen or Store
Overlay screen in order to be checked.
The following procedure describes how to check the image from the Image
Overlay screen of the Application screen.
0 The “Image Overlay” function is available only if optional hard disk is in-
stalled.
1 Touch [Application], and
then touch [Image Set-
tings].
– To check the image
from the Store Over-
lay screen, display
the Store Overlay
screen, and then per-
form the same pro-
cedure starting from
step 3. For details on
displaying the Store
Overlay screen, refer to “To store an overlay image (Store Overlay)”
on page 8-28.
The Image Settings screen appears.
2 Touch [Image Overlay].
– To cancel the Image
Settings functions,
touch [OFF].
The Image Overlay
screen appears.
To Next Page
Loading...
Need help?
General
