How to fix a Konica Minolta bizhub 211 All in One Printer copy that is too light?
If your Konica Minolta All in One Printer is producing copies that are too light, it could be due to the copy density setting or the paper being used. * Check the copy density: Press the [Density] key and select a darker copy density. * Check the paper: If the paper is damp, replace it with new paper.
What to do if Konica Minolta All in One Printer copy is too dark?
If your Konica Minolta All in One Printer is making copies that are too dark, there are a couple of things to check: * Copy Density: Make sure the copy density isn't set too dark. Press the [Density] key and select a lighter copy density. * Document Position: Ensure the document is pressed closely against the original glass.
How to align image properly on Konica Minolta bizhub 211 All in One Printer?
If the image is not aligned properly on the paper when using your Konica Minolta All in One Printer, consider the following: * Document Position: Ensure the document is correctly positioned against the document scales. * Document Feeder: If using the document feeder, lift it open and correctly position the document against the document scales. * Adjustable Guides: Slide the document guides against the edges of the document. * Paper: If curled paper was loaded into the paper drawer, flatten it before loading.
Why is my Konica Minolta bizhub 211 copy blurry?
A blurry copy from your Konica Minolta All in One Printer can be caused by: * Damp paper: Replace the paper with new paper. * Poor document contact: Position the document so that it is pressed closely against the original glass.
Why Konica Minolta All in One Printer does not make copies when pressing start?
If your Konica Minolta All in One Printer isn't making copies even when you press the [Start] key: * Check the 'Error' indicator on the control panel. Follow the instructions in any messages that appear on the display. * If the machine was just turned on, wait until it has finished warming up.
What to do if nothing appears on Konica Minolta bizhub 211 All in One Printer display?
If nothing appears on the display of your Konica Minolta All in One Printer: * If only the indicator on the [Start] key is lit up in green, the machine has entered Power Save mode. Press any key in the control panel to cancel Power Save mode. * If the auto shut-off operation was performed, set the power switch to 'O'.
What to do if my Konica Minolta All in One Printer displays 'NOT ACCEPTED PASSWORD'?
The 'NOT ACCEPTED PASSWORD' message indicates that the secure print password you entered is incorrect, so the document cannot be printed. Type in the correct password.
What to do if Konica Minolta All in One Printer does not enter Copy mode?
If your Konica Minolta All in One Printer does not enter Copy mode, check if the indicator on the [Interrupt] key is lit. If it is, press the [Interrupt] key to cancel Interrupt mode.
Why the start key indicator does not light up on Konica Minolta All in One Printer?
If the indicator on the [Start] key of your Konica Minolta All in One Printer does not light up, ensure the account number is entered according to the procedure described in 'Entering the account number'.
What to do if my Konica Minolta All in One Printer shows 'PAPER SIZE ERROR'?
This error occurs when the paper size specified in the printer driver doesn't match the paper size loaded in the drawer. Try opening the paper drawer with the size error and closing it again. Also, check if a custom paper size has been entered, and if so, correct the paper size from Utility mode.
General| Print Speed | 21 ppm |
|---|---|
| Print Resolution | 600 x 600 dpi |
| Copy Speed | 21 cpm |
| Copy Resolution | 600 x 600 dpi |
| Scan Resolution | 600 x 600 dpi |
| Paper Capacity | 250 sheets |
| Monthly Duty Cycle | 15, 000 pages |
| Connectivity | USB 2.0 |
| Printing Technology | Laser |
| Max Paper Size | A3 |
| Memory | 32 MB |
| Functions | Print, Copy, Scan |
| Original Size | A3 |
| Type | Monochrome |
| Zoom Range | 25-400% in 1% increments |
To Next Page
