3
Select the sorting option, and press [Enter].
Use the numeric keys to enter the number of copies.
4
You can set 1 to 99 copies.•
When the number of copies is not set, one copy will be made.•
Press <Start>.
5
Reduction / Enlargement
Adjust the magnification setting to reduce or enlarge the image (specified zoom ratio).
When specifying the zoom ratio, you can specify a default zoom ratio or any freely set
zoom ratio.
When enlarging the copy, you can only use the document glass to scan.•
You can set a zoom ratio between 25% and 400% when using the document glass •
and between 25% and 100% when using the ADF.
Depending on the selected zoom ratio, some of the image may be left out or there •
may be extra blank areas on the paper.
The paper is automatically selected according to the zoom ratio. To select the paper •
to use, select the cassette containing the paper you want to use for copying from the
touch panel.
Load the document, and press <Copy>.
1
For details on loading documents, refer to Chapter 1, “Loading Documents” in the User's •
Guide.
Set the document type • (see page 1-6) and contrast (see page 1-7), as necessary.
To Next Page
Loading...
Need help?
General
