E-1
//
INSTALLATION MANUAL
A7AH-9601-00
Applied Machines: / /
<Important>
Be sure to correctly follow the procedures in order as explained in this Installation Manual.
If you do not follow the procedure in order, the image trouble may occur.
1.
Outline of installation procedures
When installing the main body and associated options as a system, follow the order shown on the upper.
Caution:
• Lifting the main body in an awkward position or transporting it in a poorly balanced position could result in
personal injury. When transporting the main body, assign an adequate number of persons to the job and
ensure that each person can take a good position of not being excessively loaded.
(mass: approx. 56.5 kg (124-9/16 lb))
Note:
• For the detailed installation procedures for each option, follow the instructions given in the corresponding
installation manual and perform the procedures correctly.
• When placing the main body on the floor, make sure to use the paper feed cabinet or the desk to secure
the performance and the quality of the product.
• To use this machine, install the reverse automatic document feeder or the original cover.
• Once the Power Switch is turned ON, do not turn OFF it until the installation work has been completed.
Machine
PC-213 PC-413 DK-513PC-113
PK-519
FK-513
UK-211
MK-602
FS-533
SP-501
HT-509
KH-102
HD-522*
DF-628 OC-514
MK-734
RU-514
PK-520
FS-534JS-506 FS-534SD
AU-102
AU-201S
KP-101
WT-506
MK-735
EK-608 UK-212
*: Varies depending on the applicable marketing area
To Next Page
General
