6-3 bizhub 306/266
Printing procedure
6
6.1
6 How to Use USB Direct Print
This chapter describes how to print file stored in the USB memory.
To run USB Direct Print, [ENABLE] has to be selected in [USB DIRECT PRINT].
dReference
For details on setting USB Direct Print, refer to page 6-7.
6.1 Printing procedure
Any of JPEG and TIFF format files can be printed out.
1 Connect a USB memory to this machine.
The [DEVICE IS CONNECTED] screen appears.
2 Use the +/, key to select [USB DIRECT PRINT], then press the OK key.
3 Use the +/, key to select [LIST OF FILES] or [TYPE OF FILES], then press the OK key.
% If [LIST OF FILES] is selected, go to Step 5.
% If [TYPE OF FILES] is selected, go to Step 4.
4 Use the +/, key to select [All], [TIFF] or [JPEG], then press the OK key.
5 Select a file to print, then press the OK key.
% Up to 20 files can be selected.
% If the folder is changed, files that have been selected will be cancelled.
% Pressing the ) key enables the paper size, simplex/duplex, and number of copies to be changed.
For details, refer to page 6-4.
6 Press the Start key.
To stop printing, press the Clear/Stop key.