What to do if Konica Minolta Printer shows 'Insufficient memory to collate job [37]'?
To fix the 'Insufficient memory to collate job [37]' error on your Konica Minolta printer, press the printer's button to print the portion of the job already stored and begin collating the rest of the print job or press the printer's button to cancel the print job.
How to fix 'Network [x] software error [54]' on Konica Minolta bizhub 3300P Printer?
To resolve 'Network [x] software error [54]' on a Konica Minolta printer: * Press the printer's button twice quickly to see the supplemental light sequence. * From the printer control panel, press the printer's button to continue printing. * Unplug the router, wait 30 seconds, and plug it back in. * Turn off the printer, wait 10 seconds, and turn it back on. * Update the network firmware in the printer or print server.
How to resolve 'Cartridge, imaging unit mismatch [41.xy]' on Konica Minolta Printer?
To resolve the 'Cartridge, imaging unit mismatch [41.xy]' error on your Konica Minolta printer, check if both the toner cartridge and imaging unit are either MICR (Magnetic Imaging Content Recording) or non-MICR supplies. Change the toner cartridge or imaging unit so that both are non-MICR supplies if they mismatch.
How do I resolve 'Load Manual Feeder with [paper size] [orientation]' on my Konica Minolta bizhub 3300P?
To address the 'Load Manual Feeder with [paper size] [orientation]' message on your Konica Minolta Printer, load the feeder with the correct size and type of paper. Then, press the printer's button to continue printing.
What to do if my Konica Minolta bizhub 3300P Printer says 'Memory full [38]'?
To resolve a 'Memory full [38]' error on your Konica Minolta Printer, you can: * Press the printer's button to cancel the print job. * Install additional memory in the printer. * Decrease the resolution setting.
How to resolve 'Change [paper source] to [paper size] load [orientation]' on Konica Minolta bizhub 3300P Printer?
To resolve a 'Change [paper source] to [paper size] load [orientation]' message on your Konica Minolta printer, load the tray or feeder with the correct size and type of paper. Also, make sure the correct paper size and type are specified in the Paper menu. If needed, press the printer's button to cancel the print job.
How to fix 'Reinstall missing or unresponsive imaging unit [31.xy]' on Konica Minolta bizhub 3300P?
To address a 'Reinstall missing or unresponsive imaging unit [31.xy]' error on your Konica Minolta Printer, remove the imaging unit and then reinstall it. If the issue continues, remove the imaging unit and install a new one.
How to clear 'Non-Printer Manufacturer cartridge, see User’s Guide [33.xy]' on Konica Minolta Printer?
To clear the 'Non-Printer Manufacturer cartridge, see User’s Guide [33.xy]' message on your Konica Minolta Printer, press and hold the specified buttons simultaneously for at least three seconds.
How to fix 'Too many trays attached [58]' error on Konica Minolta bizhub 3300P Printer?
To fix 'Too many trays attached [58]' error on Konica Minolta Printer: * Turn off the printer. * Unplug the power cord from the electrical outlet. * Remove the extra tray or trays. * Connect the power cord to a properly grounded electrical outlet. * Turn the printer back on.
How to resolve 'Load [paper source] with [paper size] [orientation]' on Konica Minolta bizhub 3300P Printer?
To resolve the 'Load [paper source] with [paper size] [orientation]' message on your Konica Minolta printer, load the tray or feeder with the correct size of paper. Then, press the printer's button to continue printing.
General| Print Resolution | 1200 x 1200 dpi |
|---|---|
| Monthly Duty Cycle | 50, 000 pages |
| Memory | 256 MB |
| Warm-up Time | Less than 30 seconds |
| Type | Monochrome Laser Printer |
| Supported Operating Systems | Windows, Mac OS, Linux |
| Print Speed | 33 ppm (A4) |
| Connectivity | USB 2.0, Ethernet |
| Paper Capacity | 250 sheets |
| First Page Out Time | 6.5 seconds or less |
Covers crucial safety precautions, warnings, and cautions for printer operation.
Installation procedures for printer drivers and related software utilities for Windows and Mac.
Step-by-step instructions for correctly loading paper into the printer's paper trays.
Guidance on using the multipurpose feeder for various paper types and specialty media.
Instructions for sending print jobs from Windows and Macintosh operating systems.
Detailed explanation of paper-related settings including size, type, and loading configurations.
Configuration of date, time, and security features to protect the printer.
Step-by-step guide for cleaning the printer's exterior and internal components.
Part numbers and ordering information for toner cartridges for different regions.
Detailed instructions for replacing toner cartridges and imaging units.
Tips and best practices for loading paper correctly to prevent jams.
Identifying all areas within the printer where paper jams can occur and how to access them.
Steps to clear paper jams accessed through the printer's front door.
Procedure to remove paper jams accessed via the printer's rear door.
Instructions for clearing paper jams located in the standard paper output bin.
Steps to clear duplex jams by removing and accessing paper from tray 1.
Detailed steps for removing paper jams by accessing specific paper trays.
Instructions for clearing paper jams from the printer's manual paper feeder.
Interpreting error codes and messages displayed by the printer for troubleshooting.
Troubleshooting specific errors related to toner cartridges, including mismatches and low levels.
Diagnosing and resolving issues related to the imaging unit, such as low or faulty units.
Step-by-step guide for resolving issues when the printer is not responding.
Diagnosing and fixing frequent paper jams and feeding issues.
Resolving issues where print jobs do not print, slow down, or take too long.
To Next Page
