What to do if my Konica Minolta printer says 'Scanner disabled by admin'?
If your Konica Minolta printer displays 'Scanner disabled by admin', print without the scanner, or contact your system support person.
What to do if my Konica Minolta Printer says 'Change [paper source] to [custom string] load [paper orientation]'?
When your Konica Minolta printer prompts you to 'Change [paper source] to [custom string] load [paper orientation]', load the correct size and type of paper in the tray. Next, verify that the paper size and type settings are correctly specified in the Paper menu on the printer control panel. Finally, select 'Finished changing paper'.
What does 'Cartridge low' mean on my Konica Minolta printer?
If your Konica Minolta printer displays a 'Cartridge low' message, it indicates that you may need to order a toner cartridge soon.
What does 'Imaging unit low' mean on my Konica Minolta printer?
If your Konica Minolta printer displays an 'Imaging unit low' message, it means that you may need to order a new imaging unit.
What to do if my Konica Minolta printer says 'Cartridge nearly low'?
If your Konica Minolta printer displays a 'Cartridge nearly low' message, you can select 'Continue' on the printer control panel to clear the message and continue printing, if necessary.
What to do if my Konica Minolta printer says 'Remove paper from standard output bin'?
If your Konica Minolta printer displays a 'Remove paper from standard output bin' message, remove the paper stack from the standard bin.
What to do if my Konica Minolta Printer says 'Printer had to restart. Last job may be incomplete'?
If your Konica Minolta printer displays 'Printer had to restart. Last job may be incomplete', touch the screen to clear the message and continue printing.
What to do if my Konica Minolta printer displays 'Replace cartridge, printer region mismatch'?
If your Konica Minolta printer displays a 'Replace cartridge, printer region mismatch' message, install a toner cartridge that matches the region number of the printer.
What to do if my Konica Minolta printer displays 'Insufficient memory for Flash Memory Defragment operation'?
If your Konica Minolta printer displays the message 'Insufficient memory for Flash Memory Defragment operation', delete fonts, macros, and other data from the printer memory.
What to do if my Konica Minolta Printer displays 'Error reading USB hub'?
If your Konica Minolta printer shows 'Error reading USB hub. Remove hub', it means that an unsupported USB hub has been inserted. Remove the USB hub, and then install a supported one.
General| Print Speed | 33 ppm |
|---|---|
| Print Resolution | 1200 x 1200 dpi |
| Scan Resolution | 600 x 600 dpi |
| Duplex Printing | Yes |
| Functions | Print, Copy, Scan, Fax |
| Print Technology | Laser |
| Maximum Paper Size | A4 |
| Scanner Type | Flatbed with ADF |
| Automatic Document Feeder (ADF) | Yes, 50 sheets |
| Fax Speed | 33.6 Kbps |
| Monthly Duty Cycle | 50, 000 pages |
| Copy Speed | 33 cpm |
| Copy Resolution | 600 x 600 dpi |
| Operating System Compatibility | Windows, Mac, Linux |
| Connectivity | USB, Ethernet |
| Paper Capacity | 250 sheets |
To Next Page
