Konica Minolta bizhub 350 Manual

43 Speers Rd. Winnipeg, MB, R2J 1M2
P: 204.953.0540 | F: 204.953.0549
Konica Minolta Bizhub 200/250/350
Page 1
Enter/Change SMTP Settings
Get the IP address
First, we need to get the IP address of the machine. If you already know this, you can skip to the next section.
1. On the machine, press [Utility/Counter]
2. Touch [Printer Setting]
3. Touch [Test Print]
4. Touch [Check Job Details]
5. The configuration page will print out
6. Press the yellow RESET button
The IP address is located under the TCP/IP section of the configuration page
Enable SMTP Authentication
In order to send an email, the machine must be able to log-in. Therefore, we need to enable SMTP authentication, as by
default it is disabled. (NOTE: Be careful editing this setting. Changing the wrong Mode or Bit may damage the machine)
1. On the machine, press [Utility/Counter]
2. Touch [Admin Settings], enter the password (12345678 OR
00000000) and touch [enter]
3. Touch [Admin 2] and then touch [Software SW]
a. Select [Mode Selection]
i. Enter 380
b. Select [Bit Selection]
i. Enter 01000100
4. Touch [Enter]
5. Press the Yellow RESET button

Konica Minolta bizhub 350 Specifications

General

Category	All in One Printer
Printing Technology	Laser
Functions	Print, Copy, Scan, Fax
Print Speed	35 ppm
Print Resolution	600 x 600 dpi
Copy Speed	35 cpm
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Fax Speed	33.6 kbps
Paper Capacity	550 sheets
Monthly Duty Cycle	150, 000 pages
First Print Out Time	6.5 seconds
Duplex Printing	Yes
Max Memory	320 MB
Processor Speed	400 MHz
Media Types	Plain paper, Envelopes
Scanner Type	Flatbed
Connectivity	USB
Network Connectivity	Ethernet
Operating System Compatibility	Windows, Mac, Linux