What does error ED09CC mean on Konica Minolta bizhub 350 All in One Printer?
If your Konica Minolta All in One Printer displays error ED09CC, it means that SMB transmission malfunctions. Check the status of the destination device. A Scan to SMB transmission cannot be performed with a UNIX or LINUX system.
Why stapling cannot be performed on Konica Minolta All in One Printer?
Stapling on your Konica Minolta All in One Printer might fail if you exceed the page limit of 50 pages of Letter size or smaller plain paper. Print by specifying the number of pages per set for the number of pages that can be stapled. Also, stapling is not possible if your document contains pages of different sizes, so ensure all pages are uniform.
How to fix form that is not printing properly on Konica Minolta bizhub 350?
If the form is not printing properly from your Konica Minolta All in One Printer, this may be because the available computer memory space is not sufficient. Simplify the form to reduce the data size.
Why does Konica Minolta bizhub 350 All in One Printer fail to deliver an e-mail message?
If an attempt to deliver an e-mail message has been made, but transmission fails on your Konica Minolta All in One Printer, the e-mail address of the specified user to which the email message is to be delivered is not registered. When sending an e-mail message, the e-mail address must be specified. Register the email address of the specified user to which the e-mail message is to be delivered.
How to resolve error E4DXXX on Konica Minolta All in One Printer?
If your Konica Minolta All in One Printer displays error E4DXXX, the SMTP server address is not specified, preventing connection to the e-mail server. Specify the SMTP server address.
What to do if Konica Minolta All in One Printer displays error EAX212?
If your Konica Minolta All in One Printer displays error EAX212, it means that SMTP authentication is requested. Enable the SMTP authentication settings.
How to resolve Error Code EAXXXX when network settings are incorrect on Konica Minolta All in One Printer?
If you get Error Code EAXXXX on your Konica Minolta All in One Printer due to incorrect network settings on the computer, check the TCP/IP settings on the computer.
How to fix SMTP authentication failed error on Konica Minolta bizhub 350 All in One Printer?
If SMTP authentication failed on your Konica Minolta All in One Printer, check the SMTP authentication account and password.
What to do if Konica Minolta All in One Printer displays error EAXXXX?
If your Konica Minolta All in One Printer displays error EAXXXX, it indicates that the LAN cable is not connected, communication to the SMTP server failed, or transmission was attempted to an incorrect destination address. Check that the LAN cable is properly connected, that the SMTP server can communicate, that the network settings such as the subnet mask are correct, and that the destination e-mail address is correct.
Why data is not received because IP Scanner has not started up on Konica Minolta All in One Printer?
If IP Scanner has not started up, causing the data to not be received by the computer on your Konica Minolta All in One Printer, start up IP Scanner, check for new transmissions, and then replace the received data file with the image file.
General| Category | All in One Printer |
|---|---|
| Printing Technology | Laser |
| Functions | Print, Copy, Scan, Fax |
| Print Speed | 35 ppm |
| Print Resolution | 600 x 600 dpi |
| Copy Speed | 35 cpm |
| Copy Resolution | 600 x 600 dpi |
| Scan Resolution | 600 x 600 dpi |
| Fax Speed | 33.6 kbps |
| Paper Capacity | 550 sheets |
| Monthly Duty Cycle | 150, 000 pages |
| First Print Out Time | 6.5 seconds |
| Duplex Printing | Yes |
| Max Memory | 320 MB |
| Processor Speed | 400 MHz |
| Media Types | Plain paper, Envelopes |
| Scanner Type | Flatbed |
| Connectivity | USB |
| Network Connectivity | Ethernet |
| Operating System Compatibility | Windows, Mac, Linux |
To Next Page