Konica Minolta bizhub 360 User Manual (English)

Other manuals for Konica Minolta bizhub 360

User Manual794 pages

User Guide692 pages

User's Guide [Fk-502 Facsimile Operations458 pages

Product Guide60 pages

Questions and Answers:

M
Margaret PriceJul 30, 2025
What to do if Konica Minolta All in One Printer cannot send messages?
- Q
  qgarnerJul 31, 2025
  If your Konica Minolta All in One Printer cannot send messages, start by checking the transmission procedure before trying again. Print the Abbreviated Dialing List to verify the number is registered correctly, and correct any errors. Ensure the settings are correct. Check the telephone line connection and connect it if disconnected. Contact the destination by telephone to check for any issues on their end.
C
cody80Aug 5, 2025
What to do if Konica Minolta Mfp shows 'Not Enough Remaining Memory'?
- I
  Isaiah ThompsonAug 5, 2025
  If the Konica Minolta Mfp displays the message '...Not Enough Remaining Memory', you have two options: * To print all scanned pages, touch [Print]. * To delete the job for the scanned pages, touch [Delete].
J
john56Aug 11, 2025
Why Konica Minolta bizhub 360 All in One Printer cannot receive messages?
- C
  Charles HawkinsAug 11, 2025
  If your Konica Minolta All in One Printer cannot receive messages, ensure that paper is added. Check for and remove any jammed paper. Replace the toner bottle if needed. Perform the manual reception procedure. Check the telephone line connection and connect it if it is disconnected. If the closed area communication function is set, documents will only be received from specific destination facsimiles. Also, check the sender side to see if the sub-address is set.
D
dixonryanAug 17, 2025
What to do if Konica Minolta Mfp displays 'Misfeed Detected'?
- K
  Katherine SnyderAug 17, 2025
  If the Konica Minolta Mfp displays the message 'Misfeed Detected', it means a paper misfeed has occurred, preventing the machine from making copies. The suggested solution is to clear the paper misfeed.
K
Kyle NovakAug 22, 2025
What to do if Konica Minolta Mfp shows 'Malfunction Detected'?
- T
  Tiffany RobinsonAug 23, 2025
  If the Konica Minolta Mfp displays the message 'Malfunction Detected', turn OFF the main and sub power switch and unplug the machine. Then inform your service representative of the code displayed on the touch panel.

Konica Minolta bizhub 360 Specifications

General

Print Speed (B&W)	36 ppm
Copy Speed	36 cpm
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Fax Speed	33.6 Kbps
Paper Capacity	1, 150 sheets
Duplex Printing	Yes
Monthly Duty Cycle	150, 000 pages
Functions	Copier, Printer, Scanner
Scan Speed (Black)	36 ipm
Scan Speed (Color)	36 ipm
Network Connectivity	Ethernet
Interface	Ethernet, USB
Hard Disk Drive	40 GB