How to fix 'The original size cannot be detected' error on Konica Minolta All in One Printer?
If the message "The original size cannot be detected. Select the paper size." appears on your Konica Minolta All in One Printer, it could be due to the document not being positioned correctly or loading a document with a non-standard size. Position the document correctly and select the correct paper size.
What does 'Scan job deleted. Image does not fit selected paper size' mean on Konica Minolta All in One Printer?
If the message "Scan job deleted. Image does not fit selected paper size." appears on your Konica Minolta All in One Printer, it means that when the ADF was used to make an enlarged copy of a rotated image, the width of the image exceeded 297.0 mm, and a copy could not be printed. Change the orientation of the document loaded into the ADF so that the width of the image does not exceed 297.0 mm.
Why Konica Minolta All in One Printer won't copy after clearing misfeed?
Even if you've cleared a paper misfeed on your Konica Minolta All in One Printer but copies still can't be produced, there may be paper misfeeds at other locations. Check the touch panel for other paper misfeed indications, and then remove any misfed paper at all other locations.
General| Brand | Konica Minolta |
|---|---|
| Model | bizhub C200 |
| Category | All in One Printer |
| Language | English |
To Next Page