Authentication Manager
3
Authentication Manager 3-153
3.25 Operation for authentication
This section describes how to perform authentication from the device using
Authentication Manager as an extended authentication server (relay
authentication server).
3.25.1 Internal authentication and external authentication
As user authentication performed by Authentication Manager, the following
two types of authentication are available: internal authentication and external
authentication.
3.25.2 Handling a user for authentication
Authentication Manager handles a user name as being unique regardless of
the internal authentication or external authentication. Multiple users with a
same name cannot be registered.
If users with a same name exist in Authentication Manager and the external
server, all of them are handled as a same user.
Handling regardless of internal authentication or external
authentication
Users are authenticated regardless of the internal authentication or external
authentication.
For example, assume there is a user "A" who is performing the internal
authentication.
Function Details
Internal authentication Performs authentication using the user name and pass-
word registered with Authentication Manager.
External authentication Performs authentication using the user name and pass-
word registered with the external server.
Authentication is performed for the external server speci-
fied on the device panel.
If no external server is specified on the device panel, au-
thentication is performed for the external server specified
for a user with Authentication Manager.
2
Reminder
If the LDAP server is selected as the external
server of the user registered with Authentication
Manager, an empty password cannot be used.
Even if an empty password is registered with
the LDAP server, authentication by Authentica-
tion Manager fails.
To Next Page
Loading...
General
