Authentication Manager
3
Authentication Manager 3-19
2 Click the [Display] button.
A list of devices registered in the selected group appears.
3 Select a device to be imported, and then click the [Execute] button.
Try to connect to the device. If the connection is established
successfully, the Select User page appears.
2
Reminder
If the connection fails, check the following again.
Power supply of the device
Device settings (FTP/HTTP/WebDAV)
Settings on the "Device Information Settings" page for the Device List
If setting such as OpenAPI setting is incorrect, only a part of information
may be imported or the default values may be imported.
To Next Page
Loading...
General
