Why is N-up on multiple copies output incorrect on Konica Minolta bizhub C35?
If the output is incorrect with N-up on multiple copies from your Konica Minolta All in One Printer, choose 'Collate' only in the printer driver’s Basic Tab. Do not set collation in the application.
How to fix media mis-fed in the ADF of Konica Minolta All in One Printer?
If your Konica Minolta All in One Printer is mis-feeding media in the ADF, ensure that the loaded document meets the specifications and does not exceed the maximum capacity. Also, slide the document guides against the edges of the document.
Why are the settings in saved presets not applied on Konica Minolta bizhub C35?
Depending on the functions selected for the printer, some preset settings are not saved.
How to resolve duplex mis-feeds on Konica Minolta All in One Printer?
If you are experiencing duplex mis-feeds with your Konica Minolta All in One Printer, make sure you are using KONICA MINOLTA-approved media and that you have not mixed media types in the tray. Also, check the media path inside the duplex again to ensure that you have removed all of the misfed media.
Why colors are not registering properly on Konica Minolta bizhub C35 All in One Printer?
If the colors are not registering properly on your Konica Minolta All in One Printer, which results in mixed colors or page-to-page variation, try setting [Print Settings]/[Quality Settings]/[Gradation Adjust]/[Tone Calibration] in the [Admin Settings] menu to [ON] and then perform the AIDC color calibration. Also, check the toner cartridges for damage and replace any defective ones. Lastly, ensure that the media is not moist; replace it with new, dry media if necessary.
Why is Booklet Left and Right Binding output incorrect on Konica Minolta bizhub C35 All in One Printer?
If you are experiencing incorrect output with Booklet Left and Right Binding on your Konica Minolta All in One Printer, ensure that you choose 'Collate' only in the printer driver’s Basic Tab and do not set collation in the application.
Why is media wrinkled in Konica Minolta All in One Printer?
If the media is wrinkled when using your Konica Minolta All in One Printer, it could be due to moist media. Remove the moist media and replace it with new, dry media. Also, the media feed roller or fuser unit could be defective, so check them for damage. If necessary, contact Technical Support with the error information. Finally, make sure you are using KONICA MINOLTA-approved media.
Why are several sheets going through my Konica Minolta bizhub C35 at once?
If several sheets are going through your Konica Minolta All in One Printer together, it might be because the front edges of the media are not even. Remove the media, even up the front edges, and then reload it. Alternatively, the media may be moist due to humidity. In that case, remove the moist media and replace it with new, dry media.
Why is the custom paper size different from the size that was set on Konica Minolta bizhub C35?
The custom paper size settings may change slightly due to OS round of errors in unit conversion (for example, 5.80" may change to 5.79").
How to enable Rendezvous/Bonjour detection on Konica Minolta bizhub C35?
To enable Rendezvous/Bonjour detection, use PageScope Web Connection and select [Enable] on the [Bonjour Settings] page.
General| Print Technology | Laser |
|---|---|
| Print Speed (Color) | 30 ppm |
| Print Speed (Monochrome) | 30 ppm |
| Maximum Print Resolution | 600 x 600 dpi |
| Standard Paper Capacity | 350 sheets |
| Maximum Paper Capacity | 850 sheets |
| Duplex Printing | Yes |
| Scan Resolution | 600 x 600 dpi |
| Fax Capability | Yes |
| Functions | Print, Copy, Scan, Fax |
| Paper Weight | 60-210 gsm |
| Processor | 800 MHz |
| Operating System Compatibility | Windows, Mac, Linux |
| Scanner Type | Flatbed, ADF |
| Connectivity | USB 2.0, Ethernet |
| Paper Size | A4, A5, B5, Letter, Legal |
| Scan Speed (Color) | 20 ipm |
| Scan Speed (Black) | 30 ipm |
| Fax Speed | 33.6 kbps |
| Copy Speed | 30 cpm |
Details how to authenticate users via the device itself or an external server.
Describes the process of logging in using an IC card authentication device.
Configure administrator password, password rules, and address book restrictions.
Guides on verifying and changing default driver settings and declaring installed options.
Print and delete jobs saved on the hard disk via [USB/HDD].
Save jobs as ID & Print jobs and manage them with user authentication.
General procedure for making copies, including document placement and setting copies.
Temporarily interrupt current copy jobs to make copies with different settings.
Scan documents from a computer via network, specifying settings via TWAIN or WIA drivers.
Procedure for sending scan commands from a computer using Web Service.
Explains network connection requirements for FTP, SMB, WebDAV, and Web Service scanning.
General procedure for sending scanned data via E-mail transmission.
General procedure for sending scanned data to machine's hard disk, USB, or network folder.
Register address book, group, and program destinations for scan transmissions.
Step-by-step instructions for replacing toner cartridges.
Procedure for replacing imaging units, with instructions for specific colors.
Instructions for replacing the waste toner bottle when it becomes full.
Steps for replacing the transfer roller when prompted by a message.
Procedure for replacing the transfer belt unit when its replacement time is reached.
Step-by-step guide to replacing the fuser unit, with safety precautions.
General guidelines for machine care, including cleaning and handling precautions.
Procedure for cleaning the four laser lenses using the provided cleaning tool.
Lists actions to ensure proper media handling and avoid misfeeds.
General instructions and precautions for safely removing misfed media.
Table of symptoms, causes, and solutions for common media misfeed issues.
Troubleshooting guide for issues like machine power, control panel display, and printing failures.
Addresses issues like blank pages, poor density, and image defects.
Explains various status, error, warning, operator, and service messages.
Step-by-step instructions for installing the Lower Feeder Unit PF-P08.
Step-by-step instructions for installing the Working Table WT-P01.
Explains the IC card authentication system for personal authentication and job execution.
Guides on configuring user authentication settings using PageScope Web Connection.
Explains how to log in using IC card authentication, including Power Save mode.
To Next Page