[Applied Functions] 1-40
1.5 Available operations in Administrator mode
1
1.5.4 [Print] tab
[Default Settings] - [General Settings]
To display: Administrator mode - [Print] - [Default Settings] - [General Settings]
Configure the paper and paper tray settings used for printing, and the setting on printing condition if no set-
ting is specified by the printer driver.
Item Description
[PDL] Select the Page Description Language. When you select [Auto], this machine
automatically switches between PCL and PS.
[Auto] is specified by default.
[Paper Source] Select the paper tray for the printing paper.
[Tray 1] is specified by default.
[Duplex] Select whether or not to print an original on both sides of paper when data con-
taining multiple pages is printed.
[Off] is specified by default.
[Binding Position] Select the binding position for 2-sided printing.
[Left Bind] is selected by default.
[Sort/Staple] Select whether to feed out each set of copies separately or staple pages.
This function is only available when bizhub C3850FS is used.
[None] is specified by default.
[Output Tray] Displays the primary output tray.
[Copies] Enter the number of copies to be printed.
[1] is specified by default.
[Paper Size] Select the size of paper for printing.
The default value depends on the region the machine is used in.
[Width] / [Length] When you have selected [Custom Size] in [Paper Size], enter the width and
length of the paper.
[Paper Type] Select the paper type used for printing.
[Plain Paper] is specified by default.
[Collate] When printing multiple sets of copies, select whether to make prints on a set
basis.
[Off] is specified by default.
[Auto Continue] Select whether or not to continue printing when the paper size and type of the
print job are different from that of the paper loaded in the paper tray.
[Off] is specified by default.
[Hold Job Timeout] Specify the time period during which a print job is stored in the HDD.
[Disabled] is specified by default.
[Grayscale Page] Select the printing method of black-and-white page when color printing is car-
ried out.
• [Auto]: Prints according to the setting of the first page.
• [Grayscale Page]: Prints by detecting that the page is black and white for
each page.
• [Color Print]: Prints the black-and-white page as color page.
[Auto] is specified by default.
[Original Direction] Select the orientation of the image to be printed.
[Portrait] is specified by default.
[Minimal Print] Select whether or not to slightly reduce the full page size when directly printing
a PDF, PPML, or OOXML (docx, xlsx, or pptx) file. This function is available
when printing the entire original image, including its edges.
[Off] is specified by default.
[TIFF Auto Paper Se-
lect]
Specify the method for determining the paper to be used when a TIFF, JPEG,
or PDF file is directly printed.
• [Auto]: Prints on paper that matches the image size.
• [Priority Paper Size]: Prints on the primary paper size.
[Priority Paper Size] is specified by default.
To Next Page
Loading...
Need help?
General
