5
5-6 bizhub 350/250
5.3 Error message displayed
When a problem occurs with the FK-502, the following error messages are
displayed in the screen. Take corrective actions by referring to the explana-
tion. If the document still cannot be sent properly even after attempting to
correct the problem, please contact your service representative.
!
Detail
Refer to the “User's guide – Copy operations” provided with the FK-503
for problems such as jamming of originals, paper jams, poor image qual-
ity or running out of toner.
If any message other than those listed above appears, perform the operation
described in the message.
Error message Cause Remedy
Original size cannot be detect-
ed.
The paper size of the document
cannot be detected.
Select the paper size of
the document.
This mode cannot be set with
XXX.
Functions that cannot be used
together are selected.
Make copies using only
one of the functions.
The job has been deleted. Not
enough remaining memory.
The memory is full. If documents stored in the
memory are waiting to be
printed, print them.
Malfunction detected. Please
call your Technical Representa-
tive.
Some malfunction occurred in
the machine.
Inform your technical rep-
resentative of the code
displayed on the touch
panel.
To Next Page
Loading...
Need help?
General
