11
bizhub 350/250 11-3
11 Utility mode
11.1 Utility mode screen
List of registration information and parameters
A utility mode should be designated to manage this machine. It is recom-
mended that a specific person be authorized as utility mode to prevent con-
fusion.
The procedures for entering in and exiting the utility mode and setting fax
functions are described below.
2
Note
The buttons that appear in the screens differ depending on the specified
settings.
Buttons marked with
*1
may not appear depending on the specified set-
tings or whether specific options are installed.
For details on buttons marked with
*2
, refer to the user’s guide [Network
Scanner Operations].
For details on the buttons marked with
*3
, refer to the user’s guide [Print
Operations].
For details on the buttons marked with
*4
, refer to the user’s guide [Box
Operations].
If user authentication settings have been specified and the [Utility/Coun-
ter] key is pressed without performing user authentication, only the but-
tons marked with
*5
appear.
For details on the functions with no mark and no reference page indica-
tion, refer to the user’s guide [Copy Operations].
To Next Page
Loading...
Need help?
General
