Scanning Images Using TWAIN (PC Scanning Function)
9
C350 9-3
9.4 Retrieving Images Using TWAIN
Retrieval procedure
1 Set the document on this machine.
2 In the application used to retrieve images, carry out the TWAIN scan
operation (for example, click “Select Device” on the “File” menu).
3 Select the retrieval destination for the scanned data (IP address:port
number). In the retrieval destination list, available TWAIN devices on
the network appear. To search for retrieval destinations, click the
[Setting] button and specify the conditions in the dialog box that
appears. (Refer to “Searching the Scanner” on page 9-6.)
4 Click the [OK] button to open the scan dialog box.
5 Specify settings for the following.
To Next Page
