Konica Minolta CM-M6 User Manual

92
3
Environment Settings/Other Settings
 Screen Brightness
The brightness of the LCD can be set in five levels.
Memo
Screen brightness is set to “3 (Standard)” under the initial settings.
Operating Procedure Start the procedure from the <Setting> - <Instrument setup> screen.
1 Use [] or [] to move the cursor to “Brightness”,
and then press the [Confirmation] key.
The <Brightness> setting screen is displayed.
2 Use [] or [] to move the cursor to the desired
brightness.
Settings
5 (Light)
4
3 (Standard)
2
1 (Dark)
3 Press the [Confirmation] key to confirm, and then
press [ESC].
The selection is confirmed and the screen returns to the
<Instrument setup> screen.
Notes
If [ESC] is pressed without pressing the [Confirmation]
key, the settings will not be changed and the screen will
return to the <Instrument setup> screen.
Sample
Setting
0002 TARGET-2
Instrument setup
Brightness
Measurement button
ON
Beep
ON
3
Direction
Sample
Setting
Brightness
Beep
ON
3
Direction
0002 TARGET-2
Instrument setup
[ ]
Brightness
5
4
3
2
1

Konica Minolta CM-M6 Specifications

General

Brand	Konica Minolta
Model	CM-M6
Category	Measuring Instruments
Language	English