Konica Minolta DiMAGE Z20 User Manual

105
The hardware devices to be stopped will be
displayed. Highlight the device by clicking on it
then click “Stop.”
Confirm that the access lamp is not lit and then drag
the mass-storage device icon and drop it into the
trash. Turn the camera off, and then disconnect the
USB cable.
A confirmation screen will appear to
indicate the devices to be stopped.
Clicking “OK” will stop the device.
A third and final screen will appear
to indicate the camera can be safely
disconnected from the computer.
Close the window, turn the camera
off, and then disconnect the USB
cable.
Mac OS
DiMAGE_Z20_English_B412.qxd 04.12.27 16:57 Page 105

Konica Minolta DiMAGE Z20 Specifications

Camera Sensor

CCD type	1/2.5-type interline primary-color CCD
Number of effective pixels	5.0 million
Total number of pixels	5.2 million

Battery

Battery type	Four AA alkaline or Ni-MH batteries
Battery performance (recording)	Approximately 450 frames
Battery performance (playback)	700 minutes with alkaline batteries

Camera Lens

Lens construction	11 elements in 9 groups
Maximum aperture	f/3.2 - f/3.4
Focal length	6 - 48 mm (35mm equivalent: 36 - 290 mm)

Operating Conditions

Operating temperature	0° - 40°C / 32° - 104°F
Operating humidity	5 - 85% (noncondensing)
Optional external power source	AC Adapter AC-11

Dimensions and Weight

Dimensions	109 (W) X 82 (H) X 94 (D) mm
Dimensions (inches)	4.29 (W) X 3.23 (H) X 3.70 (D) in.
Weight	Approximately 300g / 10.6 oz.