13
INSERTING BATTERIES
Insert the batteries as indicated on the diagram on the inside of
the battery-chamber door. Confirm the positive and negative
battery terminals are oriented correctly.
To open the battery-chamber door, slide the lock to the open
position (1). Slide the door to the front of the camera (2) to release
the safety catch. Lift the door to open (3).
This digital camera uses four AA-size alkaline or Ni-MH batteries. Do not use other types
of AA batteries. The camera should be off when replacing batteries.
Close the battery-chamber door and slide it toward the back of the
body (4) to engage the safety catch. Slide the batter-chamber lock
to the close position (5).
1
2
3
4
5
To Next Page
Loading...
