EasyManua.ls Logo

Konica Minolta DiMAGE Z20 - Continuous Advance

Konica Minolta DiMAGE Z20
124 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
47
CONTINUOUS-ADVANCE MODE
The continuous-advance drive mode allow a series of
images to be captured while holding down the shutter-
release button. The number of images that can be
captured at one time and the rate of capture depend
on the image-size and image-quality settings. The
maximum rate of capture is approximately 1.0 fps.
This drive mode is set in section 1 of the recording
menu.
Drive mode
Image size
Key func.
Self-timer
Single
Progressive
Bracketing
Quality
Continuous
Compose the picture as described in the basic
recording operation section (p. 22).
Press the shutter-release button partway down (1) to
lock the focus exposure for the series.
Press and hold the shutter-release button all the way
down (2) to begin taking pictures; focus is locked with
the first frame. When the shutter-release button is
pressed and held, the camera will begin recording
images until the maximum number has been taken or
the shutter button is released.
White balance
2560 X 1920
Fine 3
Standard 4
Economy 9
2048 X 1536
3
7
13
1600 X 1200
5
11
20
640 X 480
28
45
64
The use of the built-in flash, the continuous-AF focus mode, or date imprinting (p. 93)
reduces the rate of capture. The maximum number of images that can be captured with
different image quality and size is as follows:
If the continuous AF focus mode (p. 54) is selected, the focus and exposure for the series
are not locked. The AF system focuses between each frame.
1
2
DiMAGE_Z20_English_B412.qxd 04.12.27 16:52 Page 47

Table of Contents

Related product manuals